Separate names with a comma.
Not as advertised and storage issues. I shall make a win box type lash up.
I have used Opie before and shall ONLY use them again. I shall pay more attention rather than click and forget
You make a good point, I checked to see that they were a unit and not a guy in his house. Box is fully labelled but that means less and less these...
LOL, I complained. This listing did show a proper bottle, within 5 minutes they changed the image from bottle to box
Industry's contant search to shave fractions of pennies off costs while pretending that you get the same product, they are now sending oil around...
It is an aftermarket but I have the origina and that did it too. This evening I got the lever better but now it is too loose ! I shall try and...
Nothing is moving Turbo. So push against the pistion? I swapped the slave and it was the same result
Thanks Both, My brain must be parked at the moment. Slipping off the slave and checking movement is so obvious ! Yep tried it and no movement on...
Rebuilding LH side of the bike and replaced Clutch Slave. Lever hard as a rock. Replaced spare slave and no pressure. Bled a bit and lever is hard...
You should get to 20K TBH
Can't say i missed this TBH. But needed Alternator holder, not tempted to put 270 nM through clutch or crank as some vidoes showed.
OK Well into it now, spring was broken. I changed both springs. Took the chance to repaint the case too. Made a two errors on assembly so had to...
Hi Derek Do you have any in 3D ! ;-) I have one and use it all the time
Hey Guys, I have seen the bobbin comment before. My understanding is that these are semi floating and should not move
Had this on and off for a while, changed discs 4 times but turned out EBC had the wrong model number. Only way to check is with a run out guage....
Thanks a lot. it was oily and with signs of polishing so I figured. I am thinking about getting new circlips but with everything shutdown it's...
OK so thanks again guys all back to gether then....I found a washer..bugger. I have racked my brains to think where it comes from. Can any recall...
thanks. got in there and circlip is off. slipped it on and pushed like hell to see if it would come off. Nothing. Case could push it off so not...
is the pump cover doing any holding of the pump?
Yep replies make sense..I shall have to try again. puller and then clean the cases again. Bit flimsy though, just that ting little circlip
