Separate names with a comma.
Fire, the MY02 range included a grey 748S with red wheels (not officially referred to as a Senna) Here is an example,...
Try Renthal themselves here https://road.renthal.com/shop/fit-my-road-bike which shows two chain sizes and related part numbers and a previous...
Dan, give Rich Llewellyn a call at Louigi Moto, he may have an idea on the fault and is likely to have useable spares, maybe even a useable motor....
Dan, I think you have had a main shaft bearing fail on the 6th gear which is allowing that gear to rattle on the shaft, that would cause all the...
I use the Wurth dry lube and clean it with a rag as/after I lube it, the lube carrier fluid is very effective at loosening what little muck builds...
Had similar on a push bike fitted with a tubeless racing tyre, issue was the initial puncture was caused by a sharp flint that went straight...
Perry, there is a difference between my statement "quite worn" and "badly worn" which is your interpretation of my post. The engine sprocket is...
Sorry to disagree with a previous post but the front sprocket is quite worn, look carefully on the drive side of the teeth around 2 o'clock in...
Sorry Carlo, is missed this. I used 7.5 factory line
Ducati liquid gasket (AKA three bond) 942470014 or TB1215 £18 a tube from a reputable dealer
Many years go as an apprentice military vehicle fitter we were taught to calibrate our torque wrench especially if working on ally castings or...
Vin looks ok to me and they don't have 748 in them on the later models (my MY02 748 has a very similar vin), yours indicates a 748 built in 2000....
Looks like the number board is part number 437.1.132.1AA "Sticker" in the 999S parts book, 2 off and selling in the states at $21 each
If you are trying this method take the spark plugs out first and the motor will spin freely and quickly without killing the battery charge
From the factory manual section c1.1 page 12 Max out of round/Oval wear limit 0.03mm Max taper 0.03mm It also mentions how and where to measure
