Separate names with a comma.
Peter, try part number 6104881A, call Craig at Moto Rapido on 01962 873981 to confirm, they are available in the uk for less than £20, for ref...
Harry, the brown stains on the cases, spotting on the frame and damage to the belt cover and base of the battery box are what happened when the...
Chris, you can get spurious and apparently unrelated electrical faults on the cluster with dirty or burnt contacts on the earth path, often...
Birdie, I think I would have put it onto the battery neg anyway, on my MY02 the regrec heat sink plate has no earth and is fixed to plastic tangs...
Looks like it is an earth connection shown with dotted lines on this drawing from the manual, fixed to the reg/rec plate as already suggested....
xander, 12.8v should be plenty, I think your meter is out. You can see what happens after a full charge then disconnect the + terminal. Check...
Don't forget the issues of coolant compatibility and the difficulties of proper flushing when the bike next gets a coolant change or service. One...
On my 999 going to 15-38 from standard (15-36) the mpg dropped from around 95 from full to the light to 90, with that ratio you can use the power...
OR, modern Ducatis, (like all the water cooled ones) use pressurized systems
They are not testing the temperatures on the road and it would frankly provide some entertainment to the thermodynamicists at Ducati's engine...
You might want to read and understand what the thermostat in your cooling system does and how it controls the running temperature of the engine....
If the clutch fluid is grey metallic (not the dark grey it usually gets) your clutch push rod could be spinning in the slave which may be linked...
Jona, try this...
If you need to refurbish your master cylinder there is a seal kit part number 61041991A, Brembo part # for the kit is is 98502960 available from...
Hair drier to remove them then soak the glue with a rag and petrol, it needs to soften up before you wipe it and it should not need any effort if...
Without the seat fitted the hinge is sprung against the tank so I think yours is correct
Are you sure the two hinge bracket screws don't fix into the seat pad base through the seat unit? Also confirm the two hinge pins are inserted...
Check the seat is latching correctly and that it slides forward and down on the hinge freely as you locate the hooks on the side. Also have you...
Sunny, the problem is in the primary power cables and earths and not the smart start function, you will need to replace the cables (as everyone...
Sunny the primary earthing and power cable set up is marginal, best thing to do is get a set of high capacity bespoke leads for the battery and...
