Separate names with a comma.
CJS Racing will do it for you http://cjsracing.co.uk/flashfiles.htm
Sunny, list the fault codes and hopefully it will get fixed. Expect fault code 37.3, if you need a list of the codes and their meaning let us know
Somehow you need to get a fault code diagnosis off the ECU, the failure you describe could be one of the sensors going down and if so it will...
We had similar issue on here a few months ago which was a damaged wire from the pump relay to the fuel pump, do you have a metre? Also P8 or 1.6...
I agree, MY98 was a changeover and the new font and design was part of Massimo Vignelli's branding input from 1997 when the current Ducati font...
OR, I have a Mivv decat on mine and the pipe is flattened in that area, FWIW the bottom fixing is 2mm from the pipe and looks to have had light...
The 999 toolkit is quite sparse in comparison with the one on the 998 and later 748s, this is from the 999 manual, not sure much is missing from...
OR, use the trade discount card and get it for £10...
XH558 for info see below, I don't have digital versions of the 916SPS books but they are similar to page 91-92 from the generic 748 parts book ,...
Paul, to avoid you going down a blind alley Birdie is correct wrt the splines (they can be clearly seen in your picture as lining up). The point...
If you have the owners manual or the owners manual with US variations listed (as is often supplied) they are listed as US only. I have the...
The oem slave has this seal which sits outside of the crankcase and seals against a groove on the slave face. With the latest slaves with the...
Suzuki fitted them as standard in the 70s from X7s and GT380s upwards. Big LED figures that indicated odd things like 8, H, n or L in the wet and...
Equivalent to a Mahle OC-5 (OEM) or K&N KN-153 and is fitted to a great deal of Ducati engines looks like Purolator ML16829C, but best check with...
Max, disregard, for some reason I thought you were bleeding a 999
AirCon, Halfords are still selling the R134A recharge cylinders...
Max, for the mcyl, you just need to take the cover and diaphragm then loosen the screw (a clean 6mm socket iirc) then gently pump the lever until...
Kev, have you checked with a dealer that the part number has not been superseded? Also have you seen this...
Max, the Mcyl bleed needs to be done with the reservoir full and it needs a few gentle but progressive pumps of the clutch lever until the fluid...
Fishead, the bike has a thermostat which will set the running temp for normal riding (open road for most of the year will be 65-70c), the two fans...
