Separate names with a comma.
Long nose pliers IIRC for the lower connector and the internal drive cable can break but still bind enough to make the speedo react
CR, I did indeed, £340 for NOS TiN 748S forks (Same as 996) from an Italian ebay site called Piricambi. The intent is to get the seals and bushes...
Item has sold, El Toro or Ducbird can you lock the thread please
Confirmed in Falloon's Standard Catalogue of Ducati bikes and his history of the Desmoquatro Superbikes, first 155 were built for the US market
Folks, Ducati may not include the kits in their parts book but they do kits for some of them including older versions like the 851. Ducati...
When you fill it, you need to put it in slowly and at a steady rate and massage/squeeze the bottom hose whilst doing it.:eek:
Me too, just bought 200 loose ones for around £10, also have Earpiece xmas tree ones with three filters in the set (£20) as a emergency but even...
I always use DID, Tsubaki or other proprietary quality chains, sprockets usually AFAM or other quality replacements like Renthal. I have never...
If the battery is showing >12.7v and is holding that, then bridge the solenoid - heavy wire and expect sparks. If the motor turns over as normal...
Fire you are 100% correct, the early models may not be the best bikes but will become the most valuable ones in time. IIRC (although I maybe...
The extra space is designed for a Mars bar or a packet of extra strong mints, Mrs Denzil is always very amused by the concession to practicality...
Will this fit ?...
Thanks all, looks like it has 270 on the threads and the last person to torque that nut up was Rich or Christian at LM, they prob used 270 also
Craig did ask me "Are you sitting down? Part number is 79910512A, it's quite expensive but the guys in the workshop usually get one with the nut".
FE, 270 working range is stated as -55c to 180c so it should be ok on the heat, the factory recommendation was for engine oil and the specified...
I have a new nut (£12) and a new "the most expensive Belleville washer in the world" at £26. The flywheel took 2 minutes to remove with a £5.60...
SOLD Not sure where it was made but for sale is this 999 billet clutch cover. Fully machined and inlaid with 999 as shown. It has some minor...
Thanks folks, I went for one of the Laser flywheel one at £40.75, the tool corresponds to the one specified in my parts books for MY00 - 02...
I am interested in the various methods used by forum members to lock the crankshaft of 748/749/916/996/998s engines to 'service' the flywheel nut....
Over 41k miles on my MY02 748S, only 1 rocker so far and doing around 1500-2000 miles per year (since I got the 999) the mileage continues to...
