Separate names with a comma.
Didn’t notice a huge difference in braking power but the “feel” has improved massively
Put one on mine after the original failed, works fine but bare in mind you will have to dremel a LOT of the hand guard to accommodate it. If...
starter button once it’s turned on ;)
If you have a centre stand fitted you will need to remove that before you can remove the sump guards, apart from that it's just like any other...
Hold headlight flasher and indicated cancel buttons in as you turn the ignition on and you will get the units menu come up. You'll also have to...
Im gonna keep my coins until the superleggera shows up
Asking a bit much for a stolen bike don't you think... ;)
Ive had a shido LiPo battery fitted for around 3 years now, bike is always kept outside in cold/snow and never had a problem, Ive also left this...
55mm bi-hex, but id recommend getting a 3/4 drive socket and a long breaker bar, getting that nut off with a 1/2 one is like moving the earth
Not sure on price but id imagine it will be 1.5hrs labour plus parts so depending on your dealer i would estimate somewhere between £150-200
Might be worth buying a sealmate from ebay and trying that first as might just be so road muck stuck in the seal, happens all the time in offroad...
Sound like the previous owner didnt lube the lock, id put some wd40 or similar down the key hole and give it a good seeing to with the key, leave...
Agree with the people above, theres only a handfull of places they can be put realistically, and as soon as its been cut out, your buggered
You will be fine just dont swing off it! Just make sure its snug as its only 35nm which isnt a lot at all
ducati are old school so unfortunatly they all have belts, adds a bit of the ducati flair i suppose. After hearing a few horror story's about the...
After following the tutorial on the other forum (holding rear caliper high up with something wedged inbetween the pads) my rear brake has been...
Stop being a hooligan! ;), front preload is adjusted with a 32mm socket/spanner, just be sure to disconnect the little connection at the top of...
Had a bit of luck from the cable tie but still got around 15mm difference, going to cable tie it for the next couple of days and see if that sorts...
Contact this man http://ducatiforum.co.uk/members/aztec.11/ Great little mod, needed these to give my tomtom clearance on the navihalter
Thank god for that! Right ill get it cable tied up and bleed it again in the morning. Cheers :upyeah:
