Separate names with a comma.
I would start with basics filter etc. Then check tps and work from there. Hope you fix it
Thanks for ecutesting. They were very good, had some issues with the website but they picked it up, could not repair it and sent it back. I took...
thanks
Chris, thanks I am based in Croydon. I have looked at second hand but am wary of spending out when I could put it torward a new or replacement. Vinny
does the factory manual help you? I only have the 916 but it does go into detail
could you approach the exhaust manufacturers to see if they can supply the part?
Has anyone used www.carmo.nl in the Netherlands for ecu repairs? or any other suggestions for fixing the ecu?
Hi i have a 916 so the fittings are similar although the unions on yours are different. If this was my bike I would remove the allen screws if...
I found the issue, workshop manual says to test pin 35 and 17 or 34 with the shrowd off. undo the single screw. this had 12volts and tested the...
I have to agree with others, its the riding position and body. Maybe you could get a friend to film take photos to see how you are sitting on the...
It sounds as though you might be on the right track though,if you replaced the fuel filter and it did not suffer for a short while then it could...
My experience is with the standard speck battery. In my 916 I have used yuasa acid filled which used to last two years before I plugged in a...
i am getting worried.... using the workshop manual. tested both relays. good. tested the ignition switch. all good. tested crank position sensor....
Denzil and all thanks for your help and suggestions so far. I have removed the relays, tested them with a meter and find two pins with resistance,...
So i guess if i am not getting 12 on pin 1 and 3 then its either the wiring to the ecu or the ecu? I have just tried to change the chip as I had a...
I thought it could be the crank position sensor but reading these dont go wrong often. i have taken it off and put a metal object on the end. this...
Nelly thanks I have made up a lead and tested it from the coils that it is making contact through the coil wires.
Derek thanks I checked and have continuity from the brown white to fuel connector and the coils the wires seem good. I have pulled off all relays...
I have a mechanic friend that can change the belts in a few minutes and have them to the right tension. I took off the covers and he carried on....
Hi I hope you can help me, I have a 916 that has been in the garage for a couple of years now. I diagnosed the datatool alarm caused issues as the...
