Separate names with a comma.
Finally getting somewhere. Dropped the float level back down and rode last night. Better but not great. Started at 3 turns on idle screws and went...
Nope, I believe that was either for specific markets or an option. Took the bike out. I think it may be running rich. I'm going to drop the float...
Righto, they should still have individual wires for power but the ground is likely shared somewhere, which would explain both not working. I would...
Are they factory indicators? I'm not an expert but I believe the power wires will be individual and the grounds likely shared. I would start...
Awesome! Will do. Thanks
Nice one, thanks.
How does the choke work on these? Does it add fuel or Reduce airflow?
I've ordered some Silkolene Pro FST and will see if it helps.
Yeah, I'll see how I get on when it's both cold and raining but work says two days a week in the office and the train is £35 a day. Absolutely...
I also just got a phone mount that has an attachment to mount it to the mirror holes. So will try that too.
Nice one, thanks for that. I finished my direct access course in November. So trying to get out as much as possible to commit everything. I...
I didn't check but there are extra slots on the needle, so I could raise a bit of needed. It seems to be low throttle cruise and winding open to...
The first cutting out issue happened on Sunday, temps were well above freezing but granted, my test rides now have all been below freezing....
Yeah, checked that and couldn't see any kinks or places it's being crushed. Have also checked every line and component is clear as well as...
Compression was good, 150 and 155 from memory. One cam being out could explain difficulty in completely synching carbs even after airleak fixed...
Thanks Chris, I'll keep that in mind. I'll at least get into the floats first as I did move the carbs around to fix the air leak, so seems...
Cheers for the reply. The symptoms as it currently stands. The bike ran fine with it's vacuum leak under throttle, it would drop a cylinder at...
Okay, so still an issue after fuel pump rebuild and two new OEM plugs but it seems to be able to hang on to one cylinder for a while (barely)....
Hi All, looking for the clear warning lamp cover for a '97 Monster. Anyone have one or know where they can be had? Ta
Ta, Is the vent just a hole under the cap? I didn't see anything in the workshop manual about it. The bike took 12 liters and there was no...
