Separate names with a comma.
So......fucked by the finger of fate again! Now she won’t start! I’ve ordered a new solenoid new starter and Battery!! I can’t complain because...
Get it to me! If you buy the new parts I will do it for free!! I love working on desmo’s if you have half a day spare at some point you can help...
Update.....I ordered a oil feed line for the heads! I got sent the wrong one, I believe it’s for an early 916! Dose anyone know if I can use a...
Granted, some problems are caused by poor Italian electronics! The 916/996/748 bikes were floored from the get go by a poor starter ratio, the...
Oh! On the plus side and after a bit of research, my frame is a 98 foggy rep frame! It was supposed to be a 99 biposto!! That might also explain...
Pics to follow!!!! If my bike was at home!!!..... Imagine if you would.....lots of swearing!!!! Not....done! All insured....taxed! Went over to...
I know a bit about this! the homog’ was to lengthen the swing arm by 5mm or so! It improved straight line accuracy of the bike and a cornering...
Pleased to say I’m back after a spell away working! New ecu added and she’s a runner! Pics to follow very shortly
[ATTACH] i like my bikes with the skirt off!! a front number board for racing! the rest of the time i run fairings with no id on them at all!! it...
use some 3 part gasket on it! good enough for the engine cases and heads ect good enough for the filter????
i was just reading about your clutch and the guy that suggested you replace it! its a good shout! a small hack! use a 749/999 clutch if your...
i would say someone has been in the engine before! the washer above the oil pump has been re used! a proper ducati tec, would never bend it up...
when i tore my bike down i was pissed, i can remember the swingarm pivot bolt was siezed through the engine!! i took to it with a 1/2 inch, long...
that (washer) is a shim! it is a critical size! the split in it is a fauld and you are lucky to have found it! its the exact one that caused my...
i would need to know if your thinking of swaping the starter clutch from behind the flywheel? then the guys i know will clear up the other two...
as i said parts are swapped between 916.......1198 (not all) you would have to check if a 1098/1198 gearing works or not! i know the 999/749 dose...
i forgot to add to my rant about what you can do to the engine! when you take the cases apart, watch out for the green oil "O" rings that are in...
the bits you need to swap are the (cog) on the starter itself! the 999 one is slightly smaller! and the next (cog) the one that connects to the...
its not the flywheel/stator that i was on about! its the gear that comes off the starter and the next wheel that comes , before you get to the...
if your going all the way into the engine i would suggest swapping the gearbox out for either a 748/9 standards were close ratio, or a 996 sp/sps,...
