Separate names with a comma.
The source of most break downs is the connector for the ac from the alternator stator to the regulator/rectifier. This connector is marginal and...
Leave it where it is and decide in the spring but remove the battery and drain the tank (needs it anyway). Bikes are at their lowest price...
Go for ES01 and they are an absolute must do fitment for the 999, no import duty to pay, less cost to buy, they will arrive in a fraction of the...
CR does yours have a 50mm system on it?
Cheap shock was a Sachs, middle range/standard fitting was a Showa GD052 and Ohlins were top of the range fitment for the 9xx/748 bikes from...
Bradders, IIRC only the 748E from MY00-02 lost the adjustable headstock, all other 916/996/998 and 748s retained it. Problem with a late model,...
If it is a T reg bike surely it must be a MY99 but the frame wheel colours would indicate an SPS from that MY. Looking at it I thought it was a...
Daz, I think the 748 has always had a 3 wire (two signal and an earth screen) but not sure that later ones have the same fitting as you have...
Sniff, spec for the 1.6 sensor on a 748/916 is 680 ohms +/- 15% at 20 degrees C, it is inductive so has two outputs which are effectively on or...
Yes it would, as the modifications found in the 748R had to be homologated in a road bike production run for the new components to be eligible...
David, perhaps if you had asked how many UK spec MY00 748Rs were made, I am pretty sure she would have said 150. On the homologation issue there...
Curious as they had to make 1000 to meet the homologation requirement and say so, with the 1012 MY01 bikes would have been able to meet the...
Carlo, of the 4 white plastic straps which mount the mudguard, there is one which has a small lug moulded onto it on the inside and it has a...
This all came out of the factory workshop manual for the MY02 748
Most of them are the same, but there are some important different ones for 748Rs
Part number for the later spacer that replaced the two large washers and circlip is 714.1.041.1A "Spacer", the later sprocket flange assembly is...
Fire, is that the original MT29 Phantom on the front?
The following data is taken from official Ducati information and is intended for general reference MY02 Ducati 748 technical info 4-stroke 90 °...
