Separate names with a comma.
Your owners books says 15.5L including 3L reserve (after the light comes on, or approx 30kms reserve) I always reset the trip meter when filling...
The fuel you use ought to be the one the bike was mapped with, otherwise they tend to run a little better in the top half of the rev range with 97...
Much of the Bilt Hamber stuff is available from Opie with a forum discount or free shipping if you get it from them via ebay
Main fairings for 916/996/up to MY01 748 are very different than all 998s and MY02 748s, but the seat units are pretty much the same
Main fairings for 916/996/up to MY01 748 are very different, but the seat units are pretty much the same
The clutch switch overrides the side stand/in gear starter safety circuit to allow you to start the engine in gear when the stand is up (and...
AirCon, the reg/rec can fail to low/no voltage or the regulator can fail to high voltage as a result of this plug failing. I have had both on my...
Pasty, does it run at all and do you have a metre for measuring voltage? Also if you are Bristol area and don't want to try fixing it yourself,...
David, perhaps you could tell me where I suggested it was the bulb that at fault, all that I advised relates to the bit where the bulb plugs into...
Check the bulb seat first and then check for voltage on the +connector and earth continuity on the bulb socket. Usually a problem at the...
David, which bike and can you be a little more descriptive in your request?
[ATTACH] Pasty, as OR has asked what is the problem and do you have the circuit diagram, if so scan it and post it. There are a few on here that...
Have you tried lifting the dash and removing the connector plug, check and clean the contacts with a contact cleaner and then reconnect and...
Same part number on both bikes 54840121A
Have you checked the thermostat whilst the engine is warming up? The thermostat will open with a coolant temp around 65c and it will soon become...
For removing the tank pad you need some gentle heat, plenty of how to videos for it on youtube [MEDIA]
Jackdaw, the headlight relay is in the headlight assembly and is a bit of an effort to get to, easier to get a spare.
Zeabar, the silencer cans are interchangeable but the fit is dependant on the pipe connection diameter. You need to measure the outside dia of...
Great news, if you are interested, open the relay up you may be able to see the contacts burnt away or overheated pins on the connector....
I would have a close look at the horizontal coil LT connections, they are in the way when you fit the new cables. If it is the older spec ones...
