Separate names with a comma.
Paul, relays can chatter and present faults like that, have a look at it, why not change it anyway?
Zeabaer, 59510501A is the mono seat pad part number, the one ending in 291A is a correct seat with the earlier part number used on MY02 bikes...
Part number for the seat should be 59510501B which has a mid grey textured vinyl cover (like this one...
The grey ones with red wheels were MY02s
CR its off a 998 or MY02 748 Bip (like mine but I recovered it), the grey ones age badly with leathers and buttock contact. Are you open to offers?
Buy this and make a good one from the good bits, to get the pipes off they need to be very warm...
How about this one? https://www.ebay.co.uk/itm/DOMINATOR-Exhaust-OVAL-DUCATI-999-01-06-DB-KILLER-/272949043180?hash=item3f8d07dfec at £290 [IMG]
Gareth, read this http://www.ducati-upnorth.com/tech/gearing.php and then look at this http://www.gearingcommander.com/. Don't go below 14t on...
I am a bit confused. Are you looking to restore it to close to original as an SP or as an MY02 S or E (assuming the rolling chassis in the...
Simon you ill need a new chip anyway, TommyB on here or Rich at Louigi Moto may have one that will work. I wonder if final_edition sold this...
Also unable to log in to the website (for the second time) and the first time took 4 weeks to clear and only after a week or so starting with the...
Nelson, they can be bought separately, part number is 592.1.007.3B and they retail at £130+ FFS, the aftermarket nuts can be bought for £20-25....
Wooly, Included in your photos is one which identifies what is usually the oldest identifiable date of manufacture of the bike, that of the frame...
Air con, since removing the plug on mine and solder through jointing the wires it gets barely over 30c in most conditions, before soldering it got...
Sam, the stock Shindengen regulator rectifier on the three phase systems will run at the same sorts of voltage and speed when it is operating...
PM, the reading should be taken with a meter across the battery posts with the ignition off and is affected by ambient temperature. If your...
Carlo have a look in the parts book (page 82 for the MY01 issue) The polishing is impressive
Postmaster, charging issue, probably regulator, they are routinely set to provide max output around 14.5v with normal operating range of 13.6-14.2...
It does not really matter as the rotation of the disc will always be circular within the rotational tolerance of the disc surface. Important to...
2004 parts book suggests standard 999R for MY04 on part number 34022421A and 34022422A, the part number changes each year and is different for the...
