Separate names with a comma.
just pulled the fuel module and checked the regulator. I submerged the regulator in fuel and supplied air pressure until the regulator released...
Filter already replaced.
This is what im seeing https://youtu.be/T-uosTCh4nc Dont think pressure should be dropping when revving
I was thinking the same but pressure at idle is 3 bar. Only at high revs the pressure drops. Was thinking the pump could not keep up with the fuel...
Has anyone checked the fuel pressure on a 999, Im thinking it should be at 3bar but cant find any real info in the manual. Also it should stay at...
i have a 03 999s . It has the silver/grey wheels
it would depend how bad its leaking. You said when you get it started it will run and start the rest of the day. So it may take hours to see the...
It kinda sounds like leaking injectors. The injectors leak when the bike is not running, the longer its left the more fuel pools ,when it is...
You are right, i just pushed the screen in there after bending one end over.
Back together with fixed wiring,new fuel filter and sealed tank. Need to give it a wash and a test ride but starts and revs with no issues [ATTACH]
I managed to solder the wires back on the connector. Filled it with some JB weld and then sealed it with some tank sealer.I wasnt sure how well...
I did see that it was out of stock. RickyX did post a link to another alternative. Im wondering if i cant just solder the wires back on.
i dug out the sealant around the wires for the fuel pump and found this-- The one wire wasnt even soldered to the connector ![ATTACH]
I have done some cleaning on the tank and its looking ok. I didnt want to use any acids because i was worried about the paint so i tried...
Is the fuel strainer available as no part number is listed for it. I think mine looks like it does because it was blocked, How is it supposed to look?
RickyX is that one the same as the one on the 999 as it says its for the ST3
Bike had been sitting for just over 6 Months as ive been ill. Its been started probably 5 times during that time and left to run until the fans...
you dont have to spin it at at 100mph just enough for the indicator to see the difference between rpm and wheel speed in each gear.
i programmed mine on a stand. No need to do it on the road .
