Separate names with a comma.
it really is easy to install, clamp the ignition,power and ground wires and its done, set up is easy,i have not had a single problem with it. also...
Have the Glpro installed and its works fine, no more shifting for 7th gear.
Its all plug and play, mine is installed on a 999,i mounted the unit on the left side above the battery, wire was routed to front coil after...
Theres a connection for both coils, and one for the gear shift sensor.
was reading what you posted about the heat in the exhaust and cat and was thinking that if there are no nasty noises what if the problem is the...
Yes very easy, Lever pressure, cut time, all can be set. Even cut times at different rpms can be set.
Just installed HealTech Quickshifter, Plug and play, no cutting of wires. After the initial setup i went for a ride and i can say i was impressed....
Is the balance done with the bypass screws screwed in all the way ? Now that its back together can it be adjusted with out the airbox cover being...
After having problems with the nuts in the airbox cover a few weeks back i thought while i was waiting for a used cover off ebay to arrive ill...
not a bad idea either
ok this is what im going to try, getting a 10mm bolt and going to drill and tap the center. grind off most of the hex head to make a small...
Tim i think that solution on youtube is the only way to go, if only i had lathe and knew how to use one. i had to drill out the spinning nuts.
Tried to remove the air intake runners but two of the nuts were spinning,one on either side, after spending alot of time getting it apart is there...
Theres one thing i forgot to do after adjusting the suspension and a didnt even think about it. Went for a ride last night and the lights were so...
As soon as i sat on it and rolled down the driveway you can tell the rear spring rate has changed, was surprised it doesn't fell too hard while...
i called Ohlins and told them what measurements i was getting and my weight, they looked it up and suggested changing both front and rear springs,...
Went ahead and tried to do it with the forks in the bike, no problem at all, the springs have no markings/numbers on them so does this mean they...
I need to check which springs are in the front forks, do need to take the forks off the bike or can i get it done by just removing the caps? If i...
I did see that in Daves post but thought it was a mistype , 20K !!!! So it is a bike that you park in the living room and just look at. Thanks...
im just trying to justify spending 40k+ on a bike because i will be riding it, Dont want tobe worrying about putting any amount of miles onit...
