Separate names with a comma.
All sorted now! Turns out the starter cable was too close to the crank position sensor and I'm guess it didn't like the emf. Runs like a champ...
The bike was cranking for about 10 seconds before it happened so it was probably 50 firing strokes worth of fuel? I knew about it!!, they melted...
The immo was removed by Avanti, so it shouldn't matter about the antenna really. Yes, I did try without the dash, just the same unfortunately....
It sparks once during the initial cranking then doesn't do it again, exactly the same thing happened the first time the immo crapped out. With DP...
Yup, injectors working fine. Test the coils with JPdiag and they're fine, just not sparking while cranking unfortunately. Literally just put...
Hello interwebs! About to set the bike on fire .....(aaaaand breath) After having a bit of a strip and rebuild during the winter, I went to fire...
Bad news again... [ATTACH] Popped the shock in the damper Dyno to see how it was doing and it's all over the place, Sticking rebound needle...
I can't really remember if I'm honest, but I would have remembered if it was badly done, but I'd go for it. I've recommended them to friends before
Quite similar to higher end track fairings, but for the money they're quite good. I would definitely go for them again. Although the screen they...
Yeah it was a bit of Powdercoating in the hole not letting the bolt go any further, all sorted after much swearing :)
Or a bit of powdercoating where it shouldn't have been......
You sir.. are a gentleman
[ATTACH] To the next problem, I'm going to guess that the different swingarms have different lower shock bolts as well?
Lovely piece of kit that, would love to have my own machinery at some point. Unfortunately they're rather large!
Of course, just much easier to know what your aiming for. Pop into the DRO and let the chips fly :)
I'd like to get it all together by the end of the week, thanks though!
You don't have any dimensions do you?
Yeah I thought so, going to fit it all up first and see the best way forward :)
Once it's all up and running, I plan to weight it and calculate where COG is. I think the weight bias was 45%f/55%r which isn't too far away...
Bit more done recently, plan to have it done by the end of next month. Seat has been redesigned slightly with a much narrower leg indentation,...
