Separate names with a comma.
Applied......:biggrin:
Looks very nice, but that's a 998 frame not a 996. What's making it a 996 chassis? Edit: Suppose it could be a 996R frame....
Sorry to be a pedant but it's Italia Moto Italia Moto - About Us - Lincoln - Italia Moto Ltd< :wink:
This bearing should be a double row angular contact type and do feel very loose. The play is taken up when assembled with the axle. Test for...
Just add these and your almost there..... DUCATI 853/916 barrels | eBay
Thanks for the feedback. Order placed.
Anyone got any feedback on Carpimoto? Service good, bad etc........
Ducati John did have a deal on DP pistons, give him a call. Or Engine
Yes - I have done it.
I'm no expert but the 999 ecu has an immobiliser so it's unlikly to work without a reflash.
I've got a pair of Termignoni 45mm open carbon pipes that I've been meaning to put on ebay but can't be bothered. Going rate is about £250 but...
Front: 2x 60052RS 25x47x12mm Rear: 1x BAH0062 35x62x28mm Double row angular contact 1x NK4230 42x52x30mm Needle bearing 2x Seals 42x52x4mm...
Okay, technically it should be R10 spec hose (still available from motor factors). Although a lot (but not all) of hose seems to fuel resistant...
Just for reference the pipe in the that link is okay for the overflow pipes but not for the fuel pump. The short lengths on the fuel pump should...
Just my two pence worth.... If you have drained the tank recently i.e to change the filter etc. Then I would fill the tank and forget about it....
This is going to end in tears........
Yes - but I'm a long way from you. The wall looks quite thin. I'm not familiar with this type of stand, but it looks like all the load is being...
I don't know either. His advice/information was frequently misguided and incorrect and he didn't like being told otherwise.
Sorry can't comment on which pistons to go for but I would seriously recommend getting the crank balanced to suit. You won't really know what...
Yep the shorter two are 50 & 55mm both M10x1.25
