Separate names with a comma.
With the new seal spaced some 1.6mm forward and using a depth gauge now sits 1.4mm recessed from front face. All built back up and so far so good...
Well here’s my spacer. I’ve included my cad drawing with dimensions 34.90mm OD, 33.10mm ID and thickness 1.6mm. Turned from 1.60mm stainless...
Since my rebuild my monster has been running great but I’ve been trying to sort out a very small oil leak. I tiny amount of oil was forming on the...
Check out my thread titled Monster cluster repair If you’re clocks are different then disregard the following. I’ve seen several threads related...
Nice bike and if it helps my monster 1000 shares the same DS1000 engine and I’ve now covered 150k miles. Because she was looking rather tatty...
Here’s my two bikes recently rebuilt - monster 1000 (150k miles) and 1098s (60k miles). Ran till fans kicked in so just waiting to cool down,...
Just set up jpdiag and connected to bike and all fine. Whilst playing around here’s my cam locking tool. I’ve modified my CAD drawing to mount the...
Well here’s my circlip insertion tool. Although I’ve manufactured the circlip holding cylinder with my modeller cnc lathe - drill and then bore...
Will do with with a detailed write up and how approached my belt tension. Please bare in mind I’m no expert as only my second attempt at belt...
Almost complete - got sidetracked helping mate rebuild a barn find Honda C90 of all things. His rusty wreck looks like it came out the showroom...
Used one last week to fix a Panigale 1199. Good piece of kit, not cheap but great for a workshop.
Agree but works and if you have access to a grinder costs nothing with the exception of electricity.
Hydraulic pullers work well however if you have access to an angle grinder fit a thin cutoff disc. If too big in diameter then trim to smaller...
Phone Howard at disco volante based in Wales. He’s a really nice and helpful guy and extremely knowledgable on Ducati singles.
Not uncommon I’ve been told. In fact the RT clutch broke on a steep hill leading to tan hill and so did the spare. Definite issue with clutch...
Here’s a sample set of some nice wee classics taken with mates recently. On my monster blackballed from picture. Large amount of stunning bevels -...
Know the guy - happened at around 1am coming back from Inverary travelling home to Taynuilt. Basically hit the the deer and halved in two. Got a...
My Triumph T140 has an underslung calliper and when the bike was released the techs had problems getting them to work properly - not great when...
Same thing on my 1098 when I was giving an advisory on play on rear wheel during mot. Found the left hand side loss only stopped by retainer ring...
Here’s the heads all shimmed up to minimum clearance as per Ducati spec, newly plated barrels with new pistons/rings ready for assembly onto bike....
