Separate names with a comma.
I'd spend some time making sure all the connections in this plug are in good condition. I had a problem recently where I got stranded with the...
Yep. Master and slave are all the same.
Take off the price what it will cost to fix it and that's its true value
You have the wrong plugs in the engine. The only way you can get them out is with a thin wall spark plug socket or you have to grind down a bit of...
First thing I noticed is that you're trying to start it with the fast idle button. That opens the throttles slightly and produces too much...
OK. That's scary. You certainly need to get to the bottom of what's happening
The little o-ring seal on the push rod needs to be in good condition. Check that it's not nicked, or missing
Although none of these are exactly your bike you might be able to get enough info for your needs:...
You 'll need to drop the oil. Have a look at the height of the oil in the window and trace that around to the other side and see where it is...
I'd agree with what's been said here. When you are comfortable with everything they're fairly simple bikes and engines. I also agree with...
I find clutchless shifts in both directions on my 916cc 748 (with original close ratio box) seamless and smooth so see a quick shifter of no value...
Just the original decals. Get rid of the Ducati Performance as well
I'd leave them as is silver. You'll regret painting them black and gold is wrong for the bike's age
I've used a Barnett basket for my slipper clutch and also for the standard clutch. It works just fine. I think they are a good option being light...
I'm always mucking about with my slipper. I've never worried at all about plate orientation or order. What is important is the stack height. If it...
Probably the cheapest option is a rubber/foam merchant and get something you can cut to size and glue on
If the nike runs cleanly through the whole rev range on open throttle and the inside of the cans is black then it is most likely the fuel map has...
If you have a few minutes, pull the headlight fairing off. Then you will need to remove the headlights which is just one screw at the fron and...
My bike in different guises. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I would use the hammer and chisel method on those screws rather than a drill, which will quite likely damage the threads in the case. I have never...
