Separate names with a comma.
You need the chrome plated steel fittings. I've pulled my tank about 10 times in the last few years and they are still as good as the day I fitted...
Are you converting the bike to a full-time race bike or just going to a track day now and again? What you can do is make up some covers that go...
Excellent. Good work
Chris, I converted my 2002 748 into an 853. I used 916 cylinders from a monster s4 but any 916 cylinders will do,. The only difference is where...
My 2002 748 has VIN ZDMH300AA2Bxxxxxx
Try: https://www.ducati.ms/threads/ducati-vins-decoded.27112/ Or https://en.vindecoder.pl/
The good bit with this stand is that it doesn't have a handle out the back that can take up room in a tight garage as Roadtrip said
They will fit. I would go this route to solve the problem
Ideally you want all 3 locks to be the same key. Might be able to use the internals from the Chinese locks in the genuine part.
I think you'll find that all engine cases have a finish/paint on them. The sand cast cases may look bare but I don't think they are
Zero Gravity also make good screens. I bought a cheap Chinese clear screen recently though and kept my good one safe. Also consider a new set of...
something like this - the pushrod? https://www.gothamcycles.com/ducati-clutch-lever-pushrod-and-barrel-748998-monster-ss.html
What's the difference between a base 996 and a 996S? Is it the camshaft profile? If so you can easily take off a cam cover and check the...
I have one bike but 2 engines. I have a 748 which is now an 853. I also have a 916 with big cams. I can, and have, swapped engines in about 5-6...
What year is your bike. With my 2002 748 I can start and idle the bike on the stand. Engine only cuts out if gear selected while stand is still down
Thanks Dude. Have downloaded and will print for the coffee table.
Wrong group to ask "should I ride it or keep it locked up" Short/medium term is ok but should be ridden to well hot at least every couple of...
I had a 1981 Jota in the 90s. The clutch on that was brutal.
Lucky to be able to get out this morning in the warm autumn weather [ATTACH] [ATTACH]
I agree. I have standard master and slave cylinders and 6 spring slipper and my lever is no problem in stop/start traffic. I have standard steel...
