Separate names with a comma.
I have a Maxton Shock and they rebuilt my forks. Wasnae cheap, but so worth it. My best handling bike and it's set up for me by Maxton. Would...
I got sintered pads, rebuilt the master and a braided Hel line and it's actually ok.
You hear of these but I have not had any of these problems myself. Most studs should have been done by now, as stated. They are easy to...
Jon, I have read that the small mirror method is possible, however, have not tried this myself. When I rebuilt the engine last year the plug was...
Yep, badly. These bikes will run on one cylinder so if one of the pickups is off, it'll still go.
Are the pickups the correct way round and the correct polarity? Try swapping wires.
Sil are the best
The swingarm bearing for the Carby are SKF. They will cost about 5 quid each regardless of where you go they are rollers in a cage. Simple...
Ricambi Weiss stuffs really good, and lighter than stock.
Gary, are you on the Facebook SS page, itll sell on there so I have put a post up mentioning it. Hope you don't mind, there's always folk on there...
It's easy to look in once the filler is out, to see what the condition of the lower rear is. This is the lowest point and usually where it rots...
