Separate names with a comma.
When I’ve shimmed my Duc gearboxes they’ve only been slightly out of tolerance and already have shims/thrust spacers on both sides and the ends...
Yes same dimensions 4x7.5x7.5
I have a restrictor on the bench in the garage as just doing my fuel lines, I’ll post the measurements tomorrow, just looks like a little brass olive.
Hi Chris, Did you see the pm I sent you?
Anybody have a pair of dynojet main jets 150 for the Mikuni carbs they no longer want? Cheers
That is an original shocker, maybe a previous owner was a featherweight or the opposite so changed the spring to suit :upyeah:
Watch out for the £600 minimum buyers fee on the collecting cars site! :eek:
Hey, I don’t know the stator resistance but do a simple check of the reg/ rec by testing the diodes across the yellow wires and if they’re dead...
Yes, make sure the holes you see at the bottom of the reservoir are nice n clear
It’s in the master cylinder, strip master cylinder and give it a jolly good clean out :upyeah:
Yep, hilarious :joy:
Hey, Thanks for the reply, interesting, they certainly do look like oil level markers. Anyway time for me to get these fcr’s set up :)
I was about to stick one of these back onto a superlight engine and see I have two different ones :laughing: I’m certain the top pic is the one I...
Yea, just close it. Thanks.
Will do. Cheers.
Have you synchronised the carbs with vacuum gauges? You can do it visually looking at the butterflies and get it very close so both carbs are...
I’ve sent you a msg John...
If anyone happens to have a set of carbs that are only good for parts! I’m after the 2 springs that go on the synchronising screw in between the...
Yes
What exhaust are you using?
