Separate names with a comma.
This fact, is what's scaring me off the idea of a V4 muliti. Hell the multi is already the dearest bike around to service, could you imagine the...
New bike with only 8000 K's, bit annoying to have to replace chain, but I see your point I might check the chain for side movement first
agreed
Thanks for that, all very confusing, limited clearance and you still cant push your chain over to touch side of tyre, mine is easy to push over to...
Yes yours is starting to mark as well, the harder you corner the more it will eat into it
Yes 1260 has a 56mm increase in swing arm length which will compound the problem. 190/55 is standard for multi. Do you have anyway of measuring...
Bike is a new 1260 multi and has had this problem from day 1, chain has never been out of adjustment. And yes agree problem will only get worse...
My clearance is about the same as that ie around 3mm but side of tyre has worn down to around 5mm So safe to say it really is touching the tyre....
If so (and you own a set of verniers) could you do me a favour, I need a accurate dimension on its width, the only way you can measure this...
That "poop scoop" huger was the first thing I removed, once I took delivery of the new bike As to progress, its still on going
I had road 5's on my 15 (same as your 17) and had no clearance issues, which is why I was very surprised to have the issue on my 18
Yes I have no doubt that a loose chain will contribute to the problem. however I'm very careful of that and its always within spec
Thanks for your replies. Veetwin has told me what I needed to ask (and didn't) the clearance on his at 8mm. It's glaringly obvious my 3mm...
I recently noticed some pretty nasty gauging out of the side of my rear tyre. I'm guessing under hard right hand cornering the tyre is flexing...
Thanks, much appreciated
Thanks for your feed back Would it be possible to post a picture of the bike with the std screen and the spacers ??
Please let us know how that goes
If you try the spacers, could you please give us your thoughts on them as well. The idea intrigues me
I have a DUC.EE left over from my DVT, does anyone know if it fits the 1260, and if so where does it plug into, as it appears from my first look...
A couple of screen shots[ATTACH] [ATTACH]
