Separate names with a comma.
From having a very quick Google and search on here, is it Ducati P/N 000056803? https://www.stein-dinse.biz/product_info.php?products_id=158666
Did you reflash the ECU to correct the TPS reset that you tried with the software? Were you trying to start it with the rear cylinder linkage...
Can you not start by using JPDiag to read the value directly from the ECU? Much easier than trying to hack into the wiring?
As it's a 4s (desmoquattro) you might need this one :- http://www.bikeboy.org/ducati4vthrottleb.html Starting point would be to hook up JPDiag,...
Thankyou so much for your help!
Thankyou @nelly , that would be perfect. It's what I've used so here's hoping!
Edit for being too stupid to read the manual properly for the preload:- [ATTACH] Read it again and understood what was wrong. Now properly set to...
The eBay one looks correct - as you say it's a longer-nosed part.
On your JPDiag thread, what do you mean by " The normal keys I have used to start it, only recently broke"
It should fit, yes. As I've said before though, even if the bike cranks really well, if the battery goes below 10.xV (can't remember the exact...
So now you've got it cranking well, recharge the battery and do the basic checks - does it spark when cranking? Does the fuel pump run when you...
I've had a search on the forum and on the 'net in general, but can't find what I'm looking for, so here goes.... This past weekend I stripped and...
So you get no response from the starter button at all? The dash lights stay on when the button is pressed? I think you're right to wonder about...
Do you get any dash lights/fuel pump when you turn the key on now? The low-tension wire into the starter solenoid can pop out, meaning you get no...
Two things that may or may not help. 1) The ECU has a power saving function, so if the bike isn't cranked 10 seconds after turning the power on,...
Is it not more likely that the low compression is relating to valve seats than bores/rings, or is it using lots of oil too? That's still quite a...
Is there any kind of ABS/TC recalibration that can be done through the dash? Has the bike had a tyre change, and is it running standard sized tyres?
Do the error codes specifically point at the rear wheel sensor? If it's not the sensor itself, it could be the wiring to/from the sensor. Could it...
Another way (if you can't find the exact connector, and don't want to change the entire loom) could be to replace the solenoid for a similar type...
The ECUs are different ST4 to ST4s. ST4s uses the IAW59M ECU, similar to the Monster S4 and the 996 superbike, with the ECU mounted on the battery...
