Separate names with a comma.
Yep, definitely caught me out when I first got the bike.....
That's great you got it started. Perhaps with a fuel line breaking down and an old fuel filter it's possible something got through to the...
OK, interesting about your fuel lines. So if you can hear the relays energise when cranking, the ECU knows the engine is turning. As Johnny says,...
Do you have the fuel pump priming when you turn the key on? Do you have any immobiliser light flashing/not flashing when you try to start? Have...
If you clear the codes that are stored (to make sure any old ones are removed and you're only looking at fresh ones) and then re-try, what codes...
No, but the split hose could if it causes a weak mixture, which I suppose with some revs on and a closed throttle could do.
You might want to put a picture up showing exactly what's going on, but in general:- [ATTACH] The adjuster bolts (22) go through the end plates...
I'd be looking to check the charging voltage at the battery with the engine running and the headlight on, using a multimeter. Based on the voltage...
The fuel pump relay may also run the coils, which may be why you see the voltage disappear. Try measuring the voltage at the coil connectors...
When were the brakes last stripped and cleaned? My bike came with 4-pad calipers from a 999, which I thought were OK but not great. I stripped the...
Great project, I'd love to build something by picking and choosing the parts I wanted to put on! As brake components aren't available separately...
Good point to distinguish if this is a wiring or real clutch issue. If you put the bike on the centrestand, engine off, in gear (doesn't matter...
You can do something for less than that, I'd make something up using a gauge like this:-...
Hi Chris, I have an IMM006.04 unit from my 2003 registered ST4s, but it's from an IAW59M system. I don't have an IAW5AM ECU but have a spare...
Sorry if its off topic, but can I ask how the hydraulic clutch conversion works? Apologies for my ignorance, but all the hydraulic clutches I've...
It could be in the shock top and bottom bearings, which are removable if you have an Ohlins, not sure about Sachs/Showa kit. Alternatively, there...
Still after one of these, if anyone has one?
If it's like the ST tanks, lifting the tank onto it's prop when full can stress the spot welds holding the hinge onto the back of the tank. These...
Fuel level sensor doesn't click. If you're getting a click/clunk - the pump is gummed up and can't turn. Has it been sat for any length of time...
You'd just need a short length (50mm would do it) of a suitable length of wire with some crimp-on spade connectors. Similar to this:-...
