Separate names with a comma.
Ha ha, me too
Interesing Phil, I cant answer most of your questions but I can tell you that the pit bike CDIs have been talked about elsewhere and they will not...
My appologies, yes ylu should be able to see down the side there. The galley plug is aluminium so should appear nice and shiney against the dull...
Jon, we are talking about checking it without taking the heads off.
You can take out the oil strainer and a small mirror will fit in there
Later in year then?
Im down with that, May best for me as I am off 27 or 28th is good
Im sure JE do them too, standard pistons that is. Not sure if the later piston rings are the same.
I had a look at this and they have a 15mm repair kit, but I think its actually a 16mm that you are looking for.
Its not the same
As mentioned, try Ktm as they have the best supply, I looked into this a few years back and there were several Ktm models such as the Duke, that...
Im pretty sure that you cannot get them, this has come up elsewhere before as its one of the few from that era that you cant rebuild with genuine...
Stu, I also have a 1993 'coffin' style reservoir. I searched and searched but could not find a rebuild kit, so I bought a new one from Ducati....
As others have said, although costly I would get them replated. My JE compression is quite high, in fact many recommend taking material off the...
I agree with the comments aboit the frame, get it welded and buy a frame brace from Steve Bailey in the UK for about 50gbp. Well worth it to...
The headers dont quite look like that image. [ATTACH] [ATTACH]
Forgot to reply to this. So firstly, 41mm are the usual for the 900, the 39mm can be used and I think they are meant to be better lower down the...
If you are happy with the bearings then dont change them, depends on mileage and whether you want to keep the bike etc... Remember the preload is...
I spoke to Geoff at Baines racing about this a few years ago, he said it wasnt worth it, the pipes are designed that way for a reason and the 888...
The bearings are designed to be put in one way only as Nasher says, the preload pushes the ball bearings into outer shell, which is curved on that...
