Separate names with a comma.
Yeah. Poor proof reading. 916 cylinders and pistons, existing 748 heads. Thanks for the pickup.
I only know this stuff from hours of reading because I don't want to make a mistake.
Thanks for the replies everyone. Yes, you certainly can't put 916 pistons on a 748 crank otherwise all you get is a low compression 853. You can...
Hi All. I've had a look through the forum and can't really find what I'm looking for. I wonder if there is any experience or knowledge about what...
I had the exact same issues with changing brands. I got an old spark plug socket and tapered/chamfered the end with an angle grinder, to fit in...
Yeah, probably the 996R.
If I had to pick one bike for the rest of my days it would be a 996/998R. Absolutely awesome!
I know this thread is over 4 years old. Do you still have the two 853 pistons?
Not sure what sort of result you would get with that combination. The Pistal pistons work with the original crank to give you 854cc and the right...
There's a lot of research on the web about these kits. The pistons are a good improvement for the 748 as you can leave the crankcase assembled....
I'm fairly sure from my research that they are the same. Rods might be different between the E and the R. You can probably use your old rods with...
Do you have to pull it apart to get it that clean. I find many surfaces inaccessible for cleaning properly.
There's a bit of dirt on that sidestand bracket otherwise very nice.
I agree with Hugh. Hydraulic clutches on our bikes are light compared to the cable clutches I used on bevels
180/55 Andy. It's a 748.
My rear hugger tends to bounce a bit even though it's mounted properly. Does anyone else have that problem? It means that the tyre has rubbed a...
Are the after market ones better than OEM? I'm just wondering why you would change it
Monoposto subframes have the latch in a different (higher) position than the biposto subframe. If you have a mono seat unit on a bp frame (like I...
I have a DP slipper on my 748 and I still have very good experience engine braking but you can hear when it is working as the engine slowly spins...
Why does it seem like everyone wants to bypass this switch? I don't get it.
