Separate names with a comma.
Got 2 sets headers both ZDM M06 if that helps. OD is 40 ish mm [ATTACH]
Nasher, not convinced these are for a 900, sounds like you have the narrower pipes for a 600 as I have had them before. I have downpipes in the...
Theres a stamp on the end of the rod, think you want the 'O'. The colours also different, silvers bad and black is good, most bikes have had the...
Theres only so much you can get from the video, it would be a lot easier to hear it in person. What is being described certainly sounds like...
Its a bit difficult without hearing it.......
Its looking good!
Discussed this on SS FB page, seller is optimistic with the buy it now to say the least
Im with others, leave as standard. If you go the LED route, get orange LED bulbs if possible as normal White LEDs make the lenses appear yellow,...
If you really want a top notch battery I cannot recommend ODESSEY high enough. It cranks forever, and by far the best battery I have had on any of...
If the pump is going on ok, great, check the spark plugs for wetness, if they are dry, then you arent getting fuel, check for spark too. It'll be...
I have a Shindengen Mosfet rectifier, which is great. Also have a battery/charge indicator LED which I can set to battery charge or alternator...
Refreshing the thread, Weekend of 12th I cant do but any other I should be ok, whats everyone elses availability?
Glad you got it sorted
Bit late to answer your questions but I use a diamond flat hone for the shims to keep them flat. That spring clip does easily deform from removal...
Take the breather pipe off you can run it without to test, also open filler and blow through the small pipe where the breather attaches at the...
I agree it sounds like fuel starvation, iridium plugs can also be hit and miss in these bikes
As soon as the ignition is on, the pump runs to prime the carbs.
I dont think the small gap on the valve would cause that noise, but I will wait to see what you find.
The rear shocks can be rebuilt
John, The mesh filter sits in the middle of the sump, if plastic does break in there I would hope that it wouldnt move from the bottom, however...
