Separate names with a comma.
Yes pal; Corse is just the colour & spec; it’s a road bike with one of the features being the larger tank.
Hey fellas. I have fitted a larger capacity alloy tank to my 1198; its from the Corse bike, which I think is 2 litres or so larger than the...
I’ll take this if still for sale.
I will have these if still available. Have sent a pm :upyeah:
Love that bike; its a great credit to you & Viv. I expect to see that take pride of place at the Bike Shed or similar. Simply beautiful :upyeah:
OK pal. I'm a bit too far for you to call (Manchester). Let me know if your new cable doesn't work. :)
I uses a really cheap Android tablet from ebay, which runs the Tuneecu app perfectly. Can't recall which type of leads I have but they work just...
I have one on my 1198. Its the best I have used (I have used many others in the past on other bikes). :upyeah:
On the 1198, the oem link pipes are welded to the oem cans, so yes, you will need the Termi link pipes, unless you are fitting them to a full...
This ^ I had to remove the tyre from my old Triumph wheel last night; the tyre wall & bead were so stiff & the clearance so minimal I just...
Quite a few tips on youtube; some interesting & wacky techniques. I use a heavy duty ratchet clamp. The beads always seat & let go easier with...
Good job. The CF edges very easily scratch the paintwork too don't they. How do you find the fit of the CF air tube covers? I have them on mine;...
I had the same issue & had to file it; it later became apparent that my tank had swollen to the point it was touching the steering damper on my...
MY 1198 tank had swollen. I didn't realise until refitting it & had difficulty lining up the fixing points (which you can buy a kit for I...
No, my pack started with 2 plains, so it still starts with a plain in the first position.
Thanks for the replies lads. My stack height is actually nearer to 43mm & that's with the friction plates very close to the 2.8mm limit. The EVR...
Hi fellas, I have taken a look at my OEM (non slipper) clutch while fitting an EVR pressure plate & have some questions if I may (I'm not having...
Its very sturdy; no problems with it at all. I have only used it with the iphone holder; don't have a Garmin. :)
If you look again, mine isn't mounted to the damper; it replaces one of the key guard bolts. :upyeah:
This works well for me; its position is static unlike the stem nut & bar mounts. Its from telferizer. [IMG] [IMG] [IMG]
