Separate names with a comma.
I've found the link lead I made, I'll try and get one of my children to put a picture of it on here.
I carried out this modification years ago on my 851. I'll have a dig around in my workshop and see if I can find it.
I picked up 3 speeding nicks in May/June. That'll be one awareness course, 9 points and close to £500 in awareness charge, court costs and fines.
It's not a joke Pete. Check out my other reply.
I 1st found the gold plated connectors at Radio controlled model shops, but have since got them on E-Bay. They're aren't outrageously expensive at...
I solder on gold plated bullet connectors to heavier duty silver plated wires, then cover the joints with heat shrink. Because of the gold they...
I recently attended a speed awareness course and it cost me £100.
Not always the case quite a few head gasket failures involve the cylinder pressure leaking into the coolant galleries and pressurising the cooling...
Why use a gasket when the Threebond does the job perfectly?
I had quite a few knackered ones that I'd collected over time, (none of them from my own motors!) I had sorted out/reclaimed by Newman Cams, it...
It looks used but in fairly good condition to me. Bikes are meant to be used in all weathers after all. ...and that one doesn't look like it's...
I think you've got a head gasket failure.
All the 748's had close ratio gear clusters.
Hands down the 916SPS is the winner for me. Steve R
Build the motor as a 888 the difference can't be told unless the motor is stripped and measured. You could also drop in a 916 crank without anyone...
I'd replace that worn rocker, it's already worn through the hard chrome and exposed the softer material underneath. Also that's a '92 851 they...
Christ it's 50 shades of grey...
I think you've got a non UK model speedo. Steve R
This bike needs Desmo single style rear sets to go with the already fitted clipons. Steve R
Is it just a straight 6mm rod, tapered at one end and threaded at the other? If so they very easy to make using a 6mm bolt with a long shank. Steve R
