Separate names with a comma.
Sev Sorry just seen notes at bottom of diagram. Do you mean the stamp is on the concave side. The diagram shows a "B" on the concave side. Cheers Gaz
Sev The diagram shows a dished symbol next to the convex plate C. Before reading your explanation about the plate being stamped and which way...
Thanks all. I did come across the kibblewhite. Could just about justify $285 EMS but with postage and taxes it's just getting a bit much. I think...
Pauldonjuan, Thanks for that. I did measure a bit ago and managed to buy one off ebay. When I get my garage clear of all this tip rubbish and get...
Are there any distributors for the EMS shims. Presume you will get hit for import duty and VAT. One concern is calculating the size, but actually...
Paul, Head work - Chris at http://www.cjsracing.co.uk Think most would agree. Had mine done a while ago presume still going. Bristol area. Cheers Gaz
Paul, Good luck with restoration, been on with mine about 8 years (poor effort I know). If I can help in anyway please ask. Will watch with...
Have a search for rejuvenating rubber parts. Things include heating in hot water, soak in isopropyl/wintergreen oil, spray with silicon spray soak...
No problem. Agree with getting OEM part. Are there any second hand ones on Ebay? Cheers Gaz
Sorry, must have been the light, the 2 profiles are more of an internal barb tail. I have revised the sketch. [ATTACH] Cheers Gaz
Sorry just seen new post. The sleeve is not symmetrical. There is a definatr round profile on one side and 2 lower flat triangular profiles on the...
[ATTACH] Cheers Gaz
[ATTACH] Will measure up best I can but it's not just od I'd and length. There are various steps and shoulders. Cheers Gaz
MonkeyDog, I recall reading (I have not done it) if you fit the oil cooler higher you will not be able to fit the brace (item 27) if you stay with...
Yes, correct I knew there would be something. Bike in bits so wasn't thinking about that. Cheers Gaz
While waiting for a closing shim and closing shim measuring tool to arrive - I had a theory. I thought "you have the valve, you have the shim, you...
Yes it is difficult. I think unless there was a definate difference in colour which is the oil staining on the exposed outer top part I would have...
Thanks both for that, that has given me a bit more of an idea. I think Ive seen it mentioned before that the indentation is more pronounced on...
There seems to be a difference of opinion on reusing collets if they are ok or installing new with regards to bedding in and valve clearance. I...
Keith, Yes I have a large thick flat washer, I will take the cams out and pull them in with a "G" clamp over the head until the washer contacts...
