Separate names with a comma.
I think I knew the answer really. Pressing the seal in flush gives 2.5 / 2.7mm to start of chamfer. [ATTACH] [ATTACH] I was about 2mm in so for...
Basically, have I knocked the seal in too far. There is a bigish taper on the bush and think the seal is too far in and not sealing on cylindrical...
Took the plunge to pull the rockers out and check the shims and side clearance. Ended up with about 0.6 give or take a bit on both sides so glad I...
From memory the rear wheel (on a SS) had a cone washer spacer. Make sure this is the right way round I think its cone inwards. It may or may not...
Yes thanks for replies. Sorry should have check continuity, I did think about it but thought it would not work because the pluger was touching the...
If it had 2 wires I would guess you could do a continuity test across the 2 wires and press the end in to check, but not sure what to do with one...
The switch is a spare and off the bike - just wanted to check it and make sure it was working. Cheers Gaz
Hi Derek Its one of these. https://www.stein-dinse.biz/advanced_search_result.php?inc_subcat=1&keywords=037012590&x=0&y=0&categories_id= Cheers Gaz
First Iam NO electrician I have a side stand switch with just one wire on it. Could anyone tell me how to check it is working / making a contect....
Sorry, yes its a 904cc 2 valve. Did not say in the title of thread, but I am talking about the closing rocker. I think you are correct about the...
As mentioned before this reno is taking a while. I installed the Horz cyl head closing rocker arms a while ago, and have just done the Vertical...
Is that the condition where you throw money into a bottomless pit. I just unwrapped some parts from newspaper I put away and the date was 2011, so...
I just cant help it. Cheers Gaz
Done. Had another go with puller but kept slipping through. As Arquebus said try and split it. I use a Dremel type rotory cutter with about 2-3mm...
Mark as per picture there is no pressing out. The 20mm I.D. bush has about 2mm wall and pressed up to a small shoulder so the best I can get on it...
All, Having been inspired (again) this time by Andy's Motorcycle Obsessions I set off sorting my casings out. They have been aqua blasted. The...
Cheers
Diagram does seem to show arrow pointing AWAY from tank. [ATTACH] Sorry - I think I made things more confusing. Cheers Gaz
2 things. When I stripped my tank I think there was a small breather hole in the filler cap, I think you could see it under the key flap. Also, I...
ck_uk Spot on, glad it worked - looks good. Cheers Gaz
