Separate names with a comma.
ck_uk, To me I think the cast letters and oval boarder are cast higher than finished size, painted then milled/machined and the tops taken off...
Portboy, Had the same problem, have a look at post below. Front Brake Microswitch Must be 6 or 7 years in to my reno, but I think I have turned a...
I got one out by screwing in some theaded bar into the conical nut and then thightening a nut against the cone head and the putting another nut...
Desmo, Have a look at this thread. Splitting Casing - Help Cheers Gaz
I bought some originals, measured up, and modeled in Autocad Inventor. I have the profiles or can slightly change if you give me some dimensions....
Don't usually comment in this section and was going to give Birdie an "Agree" but really wanted my own reply, so here goes. He's a prick and I...
Glad its off. Have a look at the thread I mentioned previous. I found a great difference in viscosity between manufacturers 5wt 7.5wt 10wt light &...
Mr S I have just replaced my oil see thread below https://www.ducatiforum.co.uk/threads/forks-standard-1992-900ss.57382/ I thought I had slackened...
My ref to the primary gear was for Simons benefit I have already done mine in thread below. Splitting Casing - Help Cheers Gaz
I have been concentrating my efforts on the blanking plates. I think I have the profiles as close as I am going to get them and have ordered some...
1992. I was taking heads off anyway but did not want to split casings. I thought I had got away with it but on closer inspection I could just see...
Yes, had not thought of that. Cheers Gaz
Simon, Mine was backing out at 12k. Cheers Gaz
Exige, Thank for your comprehensive reply, but I am still a bit unsure. I search all over for something that looked like the switch. I have also...
Patrick, No problem, others have brought this issue up in the past and have been meaning to look into it, it might help someone else. Cheers Gaz
Thanks a lot Derek. Do you know what bike it's off. Cheers Gaz
Hello, Can anyone identify this neutral switch. I bought it not really checking my existing one which the wires had snapped off. I have just been...
Hello, I've been meaning to look at this for a bit. I had a quick measure of the spring and think the rate is about 16 N/mm. I though I would...
Thanks Hejira / Mr R, I think I am going to have a concerted effort to get some blanking plates, thinking back I put some smaller components in...
Thanks all. Regarding preload for new bearings I thought there was a preload, not sure what it is off the top of my head will look up, but on a...
