Separate names with a comma.
Matt, A few people have different thoughts but I would not go down on the front. I personnally feel the radius is getting too tight on the chain...
PeterT, Yes I did think of that. Not sure which thread I said the studs were stainless but if I did it was information I got from other web...
RG Thanks for comments. My thoughts are Time certs look a bit more robust. Reading a few peoples reports on web sites (mainly car cyl head bolt...
JohnB What washing and pre paint treatment are you going to do on the Soda blasted parts you are going to paint. Also what did other do that have...
[ATTACH] Stav, Look at the picture of my studs earlier on in the thread. There is a lager diameter section about 8mm long before it necks down...
Billy, No that is not it. If you do a search on it you will find some pictures. you can only see the side of it and may be the end ofthe slot if...
Billy, While you have the heads off check the crank oil gallery plug is not loose. Cheers Gaz
Billy, Glad all is OK. I presume all threads are fine that's a result. Good pics nice man cave. Cheers Gaz
Duke, I had a look at galvanc corrosion a bit ago and I thought like the fire triangle you had a triangle for this. Remove one of the sides and...
I am not sure they originally used loctite, I can't really see any evidence and it does not refer to ot in the Ducati workshop manual. It only say...
That's better. Cheers Gaz
I don't get offened that easily, I at least expected someone to say " 2.15 at Kempton Park Number 3". Anyway you missed your opportunity. Thanks...
Now why did I expect a serious answer, now come on chaps can someone give me a tip. Cheers Gaz
I have tried resizing my Avatar in Microsoft paint but it still comes in cut off. Can any one give me any pointers. Cheers Gaz
Billy, Bugger. sorry to here that. It was the Horizontal wasn't it, is there any stud sticking up, presume not. I though mine was going to snap...
Billy, Sorry you are having the same problem. I had same on horizontal but they came out OK. I bought a set of roller type (3 rollers inside...
1037sps Thanks, its always good to hear some practical experiences. Cheers Gaz
Many thanks for replies. I had a look and yes it is a long way, I don't go that far on my holidays. I don't really trust posting either. Frozen...
Thanks to both for replies. I would use a heli-coil on the part of the casing which was used for fixing a bracket to or holding a cover on but...
Well, as previously reported the studs are out, but have 2 cylinder head stud holes in the casing that require mending. First has anyone made...
