Separate names with a comma.
6000 to 1 is rather good odds compared to the lottery for example: 45,057,474 to 1 (Lotto) 139,838,160 to 1 (EuroMillions) 15,339,390 to 1 (Set...
Öhlins spares are easier to come by but very expensive. I recommend Ben at BG bearings. He's been a Öhlins franchise dealer for many years.
Firstly, I don't know why there are suggestions to take out the swing arm pivot bolt? Also hex sockets won't work on the Allen head bolts that...
I have a bigger one of theirs. I use it most days. It gets covered in cutting fluid at times as I use it when machining stuff. I can't fault it....
A mitutoyo caliper for £30 is definitely fake. If you want quality at a bugdet I can recommend Shahe. They are Chinese but excellent quality.
Yes, with the rear slackened you should be able to slide the front sprocket off the shaft. I did it with a brand new chain. Took a bit of wiggling...
Would you even need to split the chain to change the front sprocket. I did it on a monster 696. No splitting of chain needed to go from 15 to 14...
I would measure the static and rider sag with what you have. As a ballpark, set your static sag to 10mm by adding or reducing preload. then sit on...
They can be difficult to get going. I have a cheap Chinese vacuum bleeder that hooks up to a compressor. Sucks the fluid through from the bleed...
Hi all, I have fitted a Rapidbike Evo to my Monster 696. It feels like it's actually working very well but it throws up an error. EML comes on...
Oh you do need to brim it. If you don't the acid vapour from the vinegar will make the exposed metal go rusty. You can dilute it a bit with water,...
I made this puller and it didn't work for me at all. I actually made parts off it from much thicker steel and it still bent like a banana. A...
Mine had gaskets when new but I have long removed them and use three bond. The 0.2 mm more or less makes near enough no difference on the clutch...
It's been around at least 20 years. We had some stuff laser welded back then but it was very specialized. I'm not sure if it's much good for...
Laser welding is really cool. Literally, keeps the heat very localised.
I use a browser called AdBlock on my phone. I don't get any adverts at all.
I thought Tig welding is the way forward but some electrical or plumbers solder is a good shout and worth a try. If you get it hot enough to flow...
My question would be: why does a legitimate owner not bother to get the V5 first which would make the bike so much easier to sell, possibly for a...
Where is the WTF button when you need it. :D
I wouldn't pay 3K without knowing what's what inside that engine. Those broken bits could have caused all manner of damage. As a bike it's worth...
