Separate names with a comma.
A bit late to the table for that. Honda's DSG Style box is effectively the same as a seamless race box just with a extra clutch thrown in. The...
It's just a length of 8mm or 5/16 rubber fuel hose. Amy hose suitable for injected fuel systems will do. Halfords sell it if your desperate for...
If you can, that would be great!
Mine are definitely the early type. OEM gasket set it is as im doing the whole engine. Had a bearing race failure on the input shaft so its all...
I need some new head and base gaskets. I see these Athena gasket sets that are priced about half of the same set OEM. What are they like. The head...
Ducati made a 700 cc engine in 2008 with 80 hp at 9000 rpm and 69Nm of torque at 7750 rpm and put it in a bike weighing 161 Kg. It sold for £5000...
Formula 1 cars, unsurprisingly, use ceramic bearings in a few places. Wheel bearings most commonly. When we talk about those bearings it's worth...
A tractor is a but vague. Size does matter. I had a Kubota B6000 which is small but a proper piece of kit. I would suggest to go to a farm auction.
I find it ironic that at 20 years old most of us were prepared to throw 60 or so years away and ride like idiots whilst at 60 years old we're so...
It's just a standard automotive 5 pin relay with one pin 87 and one 87a
I had a similar problem but the other way round. Not enough volts at the fuel pump. The wire from the relay gets spliced somewhere in the loom...
Why don't you sell the OP one of your stock?
Not mine but I have dealt with this chap before. He's genuine. https://m.facebook.com/groups/rareducatiparts/permalink/675762131264838/
When TPS is good and bodies are balanced, Co is adjusted via a small pot in the ECU.[ATTACH]
If by 916 fuel pump you mean the whole assembly, the large O-ring is 117.07mm X 3.53mm. I buy mine of Polymax. The fuel filter is a Mahle KL145....
This must be a unicorn then :)[ATTACH] [ATTACH]
Have a look for K-nuts. They're aircraft spec nuts, no Ti but very lightweight and corrosion resistant. M6 has a 7mm hex. [ATTACH]
It's indeed the hydrochloric acid that does the work. Some brick cleaners have it up to 10 percent too and also work. Don't leave the stuff on for...
I just removed mine. Just a aluminium bar without the thread worked well. Just turned the end down so it will fit inside the thread and has a...
Weather looks good for the Towcester area tomorrow morning.
