Separate names with a comma.
No it was a 748 composed of 748 SPS pistons and 748R heads that were gasflowed and with bigger valves all done and set up by CJS Ducati, the...
My son has a 748 SPS\R modified by CJS and that puts out 115BHP at the rear wheel, quite a nice little bike and pretty quick. He used it for a...
If you have stock wiring I would use the loom and the handlebar switch and then find a suitable single LED light and use or modify the bracket...
Was it originally Black? as that colour tends to go a reddish brown due to sunlight degrading the dye. If I were to think about dying I would use...
Came across this today, a very nice one-off custom Benelli 900 sei. It clearly uses a number of Ducati parts mostly around the front end. Very...
To put things into a little more perspective I paid £999 for my LC in January 1982. With inflation here's what it would cost today. The 350LC...
The complete bike. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
As I mentioned go to the forum and ask questions as you will get a polite reply. I did this when rebuilding my bike and they were very helpful...
I have an RD250LC which I have had since new. It is now classed as an historic vehicle so it's Insurance only. I have rebuilt it a few times...
748 to 996 are all the same and 998 is different.
If memory serves me right I think there were 19 and 21 pin connectors throughout the 748-998 range. I think Shazam covered this in a 748 to 996...
My friend's cousin had 105 EXY which read 10 SEXY but he was forever being stopped about the spacing at the time. In the end, he carried a letter...
Try posting on Reddit, they have a wide audience.
I did the same thing for my 998 and they said it wasn't compliant!
I purchased a job lot of oil filters a while back and a few were for 916RS and I subsequently found out that the RS does not have an oil pressure...
As mentioned above it's micro blistering and is common where water or moisture eventually rises to the surface of the paint and then often...
Demon Tweeks sells the correct hose. I purchased some last year for the same job.
I have the same plastic welding gun as above and I have repaired quite a number of fairings etc using this tool. It works very well and has...
I used an old scooter panel to repair fairings in the past as long as the same type pf plastic is used you should not have any problems.
If that's original that's a good low mileage, my LC has done 13,000 miles from new and looking at LC forums etc. that seems to be on the lower...
