Separate names with a comma.
I have detailed how a professional did it in my case in previous posts, I watched him do it at the time and it was pretty clear he had done a...
The faceplate of the speedos share the same dial sweep and relative readings. The only difference between them is that the MPH speedo reads in...
As far as the original grips go Ducati only sell them complete with the plastic roller assembly. I use Pro grips and I find them better than...
You could try driving in a star drive bit and seeing if that can get enough purchase to turn the bolt. Another option, which I have often found...
The front of the seat catch should lie fairly flat as it effectively moves in two planes hinging up and moving the seat backwards and forwards a...
Yes, all good here but not much on the bike front at the moment.
I use Fast By Ferracci bar risers which are pretty old and now, I imagine, no longer available. They raise the handlebars by about one inch which...
The seat locking plate needs to be bolted to the seat and you ideally should use a mono seat plate. You can see both of these in the parts...
Yes, they are just bungs and can be pulled out fairly easily. I use Mole grips and plenty of padding to stop them from being damaged whilst...
Free play is essential for the pedal both in terms of the pivot pin and also contact with the master cylinder. I had a rear brake literally catch...
Drill it and first try and use a bolt extractor, if it comes out then chase the thread and use some coppaslip. After that you could try the...
Muc Off silicone shine for me. Works on just about everything, great for car engine bays and rubbers seals....
As above steel rods in the SP and Titanium in the SPS. Alloy clutch cover as opposed to the thin steel one. The SPS used to come with carbon...
It does look like it to me, but I haven't seen that many so I couldn't say definitively. I know they were pretty expensive when they were sold...
I have a yellow 748SPS and changed the colour to red as they only made them in yellow, this was to match my other bikes. However, I replaced all...
They are pretty rare, but fundamentally with "unusual" things like this, it's what the market would stand. I am not sure what model this is for...
Ipods are still popular with audiophiles and I have six of them, all fifth generation. You can still get parts for them and I have made a bit of...
The headlights are all the same but the wiring differs between earlier and later models. I seem to remember earlier ones only ran on one main...
I use pro-grip, for me they are better than stock and are quite comfortable.
20 Years, a mixture of 998's and 748's Still have 3 bikes, but not ridden much in the last couple of years due to lockdown etc.
