Separate names with a comma.
I have a 748SPS and the same thing happened to me and wore a hole in my Carbon hugger. For me, it was due to the tyre growing through getting hot...
Is it plastic or Aviofibre? If it's Aviofibre then even if it is genuine Ducati it will not have any markings. If it is plastic then it should...
The pushrod, as far as I remember, is lubricated by engine oil, therefore I would just oil the rod after a good clean and slide it back. I seem...
If the shaft does have galling on it, I would suggest running a small drift through the shaft hole a few times to dislodge anything such as debris...
It sounds like the pushrod is either damaged or even bent. Early pushrods used to break and only the later modified pushrod is now sold by a...
I've had a 748S fitted with a 748R engine done by Chris. It came out at 104.5BHP and that is with stock 748 injectors and airbox. My son had a...
Pressure is about 70PSI and if you get the full kit you get two batteries and a charger. The charger is not rapid but I can get two full washes...
I use sno-foam with a Worx Hydro Shot. This is a battery-operated pressure washer with foam lance in the kit and is self-priming and only puts...
As long as they are used with the correct antifreeze you won't (shouldn't) have a problem. The OAT red antifreeze has been stated to affect...
I have Termignoni TI silencers on my 998 and agree not much different to carbon ones. The good thing is that if the wadding goes it won't burn...
Aprilia ones can be modified to work. My son had a set done for his race bike a few years back. Unfortunately, I can't remember who carried out...
I am pretty certain he is the same lister from eBay that I used and I can confirm that he does a very thorough job.
I believe it's quite a generic injector and has been used on some cars. It's certainly the same as a 748SPS and I use also these injectors in my...
I have used a professional injector cleaner via ebay before. They test the injector, clean it and then put a new o ring on. Quite decently...
When I was racing years ago it was always a scaffold board, cheap and good enough if you have a lighter weight bike, I had a TZ250. I did find...
I can vouch for him as well as he did mine some years ago complete with Ducati logo stitched in. [IMG]
I remember her from Boston legal where she played something of a dubious character who seem to "accidentally" kill people. I never watched her in...
You could try using a fibreglass pencil which is used for cleaning connections and it should be able to get down into the crevices of the female...
And vice versa I believe. I mistakenly got a P8 tacho via eBay some years back and it didn't work on my 1.6M ECU.
I always post my items to them and they are very well organised, it's a family-run business.
