Separate names with a comma.
I use Talon carriers on my three bikes two 748's and a 998. I find these neater and have collected a number of sprockets via eBay for good money...
Some use a 520 chain and sprockets on what was an originally a 525 sprocketed bike but most of these are using them for racing or trackday...
Same circuit layout as I had in 2015 doing a James Witham trackday there. Hadn't been there for many many years and quite enjoyed the day. A lot...
He also has his own website. I dealt with him about 2 years ago when I rebuilt my LC. At the time his collection of LC's numbered 40!!! and he...
As above, give them a good clean and remove any gum or residue that might be on the disc and then change them over. I guess you could even change...
You could try a thin layer\s of fibreglass tissue on the back of the area after it has been welded. This could help to relieve the flexing and...
Genuine Ducati Dzus fasteners are different to the "standard" one that many dealers sell. If you want the total OEM look check which ones you...
I have always had iPhones from the 3GS to the 7. I purchased my iPhone 7 brand new on contract for £250 plus a contract for under £26 a month...
"lots of good info there, I use a glassfibre seat from Sebimoto with the self made backet bonded into the inside. what are the options for the...
The "white" is actually cutting compund where the seat was polished. My seat is fully genuine Carbonfibreone and bears the makers name stamped on...
A "genuine" race seat does not have the fittings to take a conventional seat lock. The reason behind this is that it sits on an alloy subframe...
Many aftermarket seats including fibrglass and carbonfibre dont have the threaded inserts to fit the seat lock and plate, which is used to mount...
Plastic welding is done with a heat gun and a suitable filler rod. I bought a kit from Sealy to do mine, not cheap but it works as above. A...
I have repaired a number of fairings using plastic welding etc. and so far 99% have succeeded unless they have been under too much stress etc. and...
I've seen some that were made using the heads of plastic disposable spoons!! After seeing them I tried some for myself and they definitely had the...
I use a compression suit made by Crane, from Aldi!! I found this to be better than my EDZ base layer. However I have not tried Pro-skins and they...
I have bar risers on my bikes and they have a 25mm lift and fit in the stock position on the forks and they just about fit using the switches and...
I use a Sigma and a DP clutch on my bikes. Personally I find the Sigma better for combined use on road and track. Never had a problem with it.
As mentioned it is a shock cover, some were made and sold as suitable for Ohlins only and others could fit both. Made for the 748-998 models. I...
If you go for a NAS server and use media Streaming you will find that there are sites which have these films and you can download them from there...
