Separate names with a comma.
I had a similar issues with my 1098s. bottom line is there isn't enough juice to turn the starter AND supply spark to start the bike. there are a...
do it , they aren't too bad, i bought one of the smaller metric sets about 12 years ago and managed to bend the square drive fitting on the 3/8...
Nice one Dibble and the rest of you lovely gents. what a genuine pleasure. I hope those of you staying the night are hitting bar in style. The...
just been quoted £105 for a pair of head bearings! does anyone have the sizes of the taper head bearings for a monster S2R 1000 2006 TIA
Its been hotter and drier in UK than much of Spain..most Catalans are still wearing puffa jackets hats and scarves at the moment!!
Looking like the weather might improve just in time. Sunday looks like it could get hot !
8k is very optimistic for 09 bike with 400 miles. if its been sat for most of the last 10 years without being serviced or knowing how it was...
maybe some beru stick coils (like 999/1098 etc) would resolve this for you, you would need to adapt the 2 pin plug to fit the 3 pin on the
long ago sold sorry!
I have a red lower left panel with a scratch if you are interested
hombre call someone !!
keep yr head up @Noods! that feeling is just your brain chemistry messing with you. Its temporary and will pass. in my experience it helps if you...
I have some 5 spoke cast ally wheels 5.5 rear pm sent
Deposit taken ! very soon to be sold
check (actually just replace ) all your fuses first they are shite and prone to hairline cracks that cause all sorts of wierdness
there are 2 different sizes for the sensors m18 x 1.5 is the O2 lambda sensor the smaller plug are a british gas fitting thread 1/8 BPST eg...
i think you can buy blanks for pennies at most gas fitters
I missed the 'r' in the OP good job someone knows! i'll get me coat....
if its slightly snug it will be ideal as it will give a bit a bit in use if you find you still need something taken in or shortening, then speak...
hi yes I'm 98% they should be a straight swap on all 748/916/996/998 anyone else think otherwise? i used on 998 no problems which has the same...
