Separate names with a comma.
The only way the speedometer will record kilometres on this model is if it is a kilometric speedo. These models had dual readings on the speedo...
Size, the EVR holds more air and I believe the injectors sit inside the box on this model, It is meant to be a performance upgrade. The eBay...
The area behind the headstock can rust on these models although it is quite unseen due to the tank sitting over it. Local touching in would be...
The Power Commander is unique to the 998 models as it has different fittings. The Ohlins forks would depend on what type and model\s they were...
I believe Migliore has stopped making rearsets for the 748-9** models. Ebay have a few similar items from people like Gas Cap Dude etc. but these...
It is darker than that when seen in the flesh. You might want to check out the chip and make a comparison. There is a darker silver and this was...
If it is a later model it should be Grigio Steel. ICI produce this paint amongst others and there is a chip available for comparison.
I haven't fitted one of these but some of them bolt to a hole that is in the underside of the swing arm and has a a captive nut set into it, which...
Cheaper to email as they are in Australia.
Fast by Ferracci do bar risers, they used to just do the bar clamps themselves, which were decently priced but now they only offer the whole...
There are a few posts on this subject and I have posted myself about the "glass" removal giving some detail. Check out my replies on this subject...
It depends on several\a number of things, including service history, provenance, condition etc. etc. The mileage is clearly low and no doubt...
Simply put yes and no! Some items can be a lot less than you might expect and others seem to be way above it. Sometimes it is best to enquire...
You will need spacers to raise the seat lock plate to the correct height, these tend to vary bike to bike and for different types\makes of seat....
If the wheel is well made and good and true and the tyre is fitted correctly with the balance spot either in the right place next to the valve or...
