Separate names with a comma.
I know what you mean but eBay is littered with people not too dissimilar. When I get this reaction I tend to assume they have something to hide...
The size of the mesh varies and I particularly use the mesh made by Plastic Padding, which I purchased in bulk some years back, so I am not...
You can make the vents yourself using Aluminiium bridging mesh from makers such as Plastic Padding etc. Available from places like Halfords it...
Paints tend to be more stable now so UV is not so much of a problem as it used to be. Red will of course be affected by the sun, heat and UV as...
It may be but ICI do have a dedicated Ducati paint chip for it, personally I would look at that to see if it matches. Ferrari Red is extremely...
There are two shades of frame silver that I know of, one is Grigio Steel which I found to be a good match for my 998, although I was actually...
RS Bikepaints tend to have very accurate colour matches but they are expensive and some if not all the paint they supply is water based. I...
If you have Marchesini wheels then it is quite easy to misalign the rear wheel. You will notice however that the wheel will not entirely fit...
You do have the balls on the ramp fitted correctly and the spider spring seated on the hub in the correct manner. Is the carrier correctly set up...
The clutch plates go in in a different order on a slipper clutch, if you put them in exactly how they are in the stock setup then it's a very fair...
CJS Is in Bristol and there is a Pub with accommodation literally up the road from their premises so staying over and leaving your bike for next...
The PC3 would have been quite a new model then and has since been superseded for some models. As mentioned the PC3 totally overides anything you...
They are ex Bennetts staff who moved on to start their own company. Unfortunately I couldn't get an acceptable quote from then for one bike but...
Do you have the clutch plates in the correct order? because if not then it can cause problems. I have seen someone fit them in the wrong order...
I guess you are talking about the mono loom, which is indeed longer than the stock 748 item. They are hard to find and I was very lucky that when...
I believe the stock pump is actually a car pump and comes from something like a Subaru, but don't quote me on that. As such a higher pressure...
As has already been mentioned if you want to go the 748R shower injector route you will need the full setup from a 748R and the airbox. This...
That should be fine although with a Ducati radiator the fins are not that close together compared to some high efficiency cores, so you could use...
I painted mine black with a high temperature paint as I am not too keen on the Silver colour. So far it's lasted a few years with no sign of any...
I use cold zinc galvanising paint and then repaint over that. Surprisingly cheap from Screwfix and it works a treat. I have used it on several...
