Separate names with a comma.
The unions are very thin and soft where they enter the base of the radiator and it's very easy to get a hairline fracture and start off a leak,...
Just seen this on TV, another famous face dies of cancer. Sir Terry Wogan: Veteran broadcaster dies, aged 77 - BBC News
Good opportunity to change the gearing as well to something a bit more easier to live with, I do (did) it to all my bikes. A quick change...
You can use an FG stand and just put a few washers over the pins to stop the pins preventing the axle from coming out. A very sturdy stand and as...
I checked my speed recently and it was just over 11 mbs and I am on a non fibre package, which is fast enough for what I need it for. I would...
Beware of imitations on ebay. I have seen so called Ducati Performance clutches being sold new on eBay cheaply and if you get close to one or...
FG were the providers for the DP stands and they are very strong. I use them front and rear and from experience a cheap stand can sometimes be a...
Also in theory if you remove the sprocket nuts from a stock carrier you should replace them as they are crimped and are meant for one time use only.
If your bike is pre 97 I can only imagine that very early mirrors were finished like that by FAR themselves as rubbing down and polishing it would...
Certainly for a 748 the spacer is listed as a spare part by Ducati. I'd be surprised if anyone did have lying about unless they had a damaged...
That looks very similar to a Talon carrier so you may find those sprockets will fit. If you use a Renthal or Talon carrier then you sometimes...
Agreed, that was the reason for slimming the tank, the edge round the bulge of the tank used to get easily damaged if the bike hit the ground....
Original mirrors were made by the FAR company but there are a lot of replicas about now, especially at the cheaper end of the market. If the...
If you mean quick change then no, Talon are totally different to Rehthal etc. If you mean a stock carrier then any aftermarket sprocket should...
RAL colours will not exactly match certain Ducati colours. The Red frame colour is an example of this as it is not very close to the Rosso Red...
To add to the above idea of using a Torx fitting to undo damaged or rounded bolts you can also add in a screw gripping gel which helps to add more...
If you use or adapt a 998 wiring loom and a speed drive front wheel then I would have though it might be possible but everything electrical should...
Di-electric silicone grease is available from Maplins amongst others and is used for greasing over terminals and also on spark plug boots. It...
They are on eBay for a lot less but how good the colour match is is hard to say. If you can find a motor factor with a spectrum analyser and can...
The ones with Ducati Racing cast into them are much harder to find and having bought several pairs in the past as spares for wets etc. only once...
