Separate names with a comma.
Yes, I work very early in the morning and finish by 3pm, that way I don't get disturbed by phone calls!!!
Several things to consider here. Is it MS or HS (medium or high solid) as far as the lacquer goes. I used HS in a 1.4 tipped touch up suction...
Only the centre nut size differs between models and often with a new slipper it comes with both nuts so that your model is covered.
No SPS's were numbered on the yoke and all the genuine UK models should have been imported via Moto Cinelli who were the sole importer at the time...
What colour is it Silver or Green\Gold. Silver can be acquired in touch up or as spray for gun use from eBay. The Green\Gold which is described...
It was originally £17.99 and now not available, Barnes and Noble want $1776.31 for a copy in the US!!!!!!!!!!! Clearly a case of jacking up the...
Use paddock stands on both wheels especially if it sits on concrete and is subject to cold over the winter.
I have used Redditch Electroplating several times now for both Ducati work and also Suzuki and Yamaha parts and will continue to use them as they...
My Bell has a tiny opening just before it fully closes and I always leave it that fraction open even when doing track days just in case I get any...
I have a 998 (from new) and have had no mechanical problems with it at all and don't know any other owners that have had issues with rockers....
.the visor would stop a bullet......... (well, maybe an airgun pellet) Quite some years back I was wearing a Bell Star helmet and doing a...
The handbook does give base settings for the front and rear suspension, however up to a point it means nothing if your bike was not assembled to...
Out of the last 5 crash helmets I have bought 3 have been Bell helmets. Always liked them and i had one of the first full face Bell helmets when...
There is also a tiny grub screw in the ferrule that goes into the hole in the lever. If this is not undone then it will ruin the thread possibly...
I think these items only come with a new and complete lever as someone mentioned this before, hence my suggestion of having one made which you...
It should be possible to get a pushrod made up that is the correct size. Might be worth talking to an engineering firm or someone with a lathe.
Reverse flushing might prove useful if you want to remove any debris left.
Low readings on a torque wrench don't always give a very accurate torque setting and I have broken a bolt in the past even though I felt it had...
I use an Optimate 3 on my 998 and it's on there for months at a time and I have had no issues with it at all. I made up my own lead on one of the...
It seems best to use distilled water as I notice the 250LC Yamaha that I am currently working on uses this mixed with anti freeze. Considering...
