Separate names with a comma.
OK agreed - it was a while ago I looked at them probably before model 3 - funny how the dimensions even so are either 71mm or 271mm different though
^^^^^He wouldn't get to the end of the road on that size fuel tank
[ATTACH] Maybe I looked at the wrong model in the showroom???? cannot always believe the internet. A 6 foot 6 inch width restriction would only...
They are very wide and not so good for country lanes/B roads
At the other end of the scale [IMG]
[ATTACH] Nearly broke Ford in USA in 1959/60 [ATTACH] And the UK entry Ford Zephyr 4 with the engine that blew head gaskets every 10 minutes
[IMG]
a little peach...
PS I noticed that if I set it up and then tensioned the belt, the timing moved by up to about 15 degrees, as the tensioner bearing works on the...
Having spent ages recently trying to set my cams on my M900 using the peak opening method I am pretty sure the cam ramps are actually quite...
Do a compression check on that cylinder to see if you have bent a valve, you seem to be half a tooth out so about 20 degrees out (advanced on...
.......and all 5 sets have seized pilot jets?????
^^^^^ it doesn't look that knackered to me, probably a bit better than the one on the bike at the mo
It may be the screw that holds the plate that secures the rev counter drive to the horizontal cylinder - My experience is with a 900 so above may...
^^^^^ Zarco's number but Rabat's name - odd - The Ducati must have a surplus of horsepower to drag that lot through the air
I think some of your measurements are awry (particularly the thickness of spacers required at the front) I would be surprised if the bearing face...
