Separate names with a comma.
Only you know how much sealant you used on the vertical barrel. When using the silicone sealants I cut the nozzle so that you get a 2mm bead when...
Some jet washers have a thermal cut out, even though pumping hundreds of litres of water which you think would cool the motor, water is not...
^^^^ if you ride an XBR on salty roads check out the underside of the swinging arm - mine rotted out from the inside
Yes, that is the inlet side. If the sensor is not sitting in the oil it is not measuring the temperature of the oil, it can only be measuring the...
Not that familiar with injection bikes but if the oil temp sensor is on the exhaust (lower) side it would be sitting in a puddle of oil before it...
Do you mean rocker cover (2 rectangular-ish covers per head located fore and aft on top of the head casting) or cam bearing holder (1 on each side...
I am afraid I cannot help re the dowels, this may help, although for a 600 it is basically the same engine [MEDIA] Re the O rings I am definitely...
^^^^^ Magnet on a stick is your friend here...
Did it make a noise before you took the barrels off? If no, then in all probability you have inadvertently caused the issue e.g. incorrectly...
Moto Rapido is my go to place for spares, knowledgable parts guys and if it is available they will get it to you in a few days. Exactfit for...
I think that qualifies as the worst connector I have ever seen
A rubber band /zip tie around the brake lever overnight might sort it
I think the chequered flag paintwork inside the top wing scoops is a bit optimistic. None of the teams have been allowed to significantly modify...
In 1992 an "ordinary" 900SS was £7K, I only had £5k so had to buy a 750SS, given the change in value of money 1999 to 2021 this has not been a...
Thanks will check him out
I use a stainless dome headed nut on exhaust studs with copperslip as it stops the problem at source. No corrosion of the nut and no exposure of...
Thanks for taking the time and trouble, I am pretty sure I will have clearance issues between the caliper and the spokes and if I spacer the discs...
Iridium plugs need a bigger gap, 1mm from memory, and I recall reading somewhere that they do not work so well on Ducatis of this vintage,...
Can I ask what the offset is please? I have some spoked wheels from a GT which I would like to fit alloy rims onto to put into an S4
England played to a plan, the wrong one, the forwards did not contest rucks but stood off - result no turnover ball whatsoever Itoje /Currie were...
