Separate names with a comma.
A lighter helmet potentialy has a significant effect on injuries sustained in an accident. As i understand it the crippling injuries are caused by...
If you are taking the alternator cover off there is a screw in the region of the clutch slave that frequently gets filled up with chain grease and...
I have an S4 Monster I bought for spares and although the engine has good compression it just would not go so the previous owner just sold me the...
Ok I’ll hold my hands up, I to have just seen this thread and all I can say if “fuck me, this is bloody brilliant”. you are just looking for...
A couple of observations, the contact patch between the tool and the bolt head is larger for a torx, also the radius from the centre of the bolt...
You will want to line up the filler necks so the fuel cap finger idents line up before welding in, otherwise, you will spend the next 20 years...
sweet looking Pantah custom - well proportioned apart from the rear tyre on the front [IMG] [IMG] [IMG]
I bought similar to Hughdg - 100 litre circa 13cfm, I made my own sandblasting cabinet and as he says whilst it works well at doing the job it...
A good read this thread, my paternal grandfather joined in 1914 and served throughout WW1 in France, winning the MM, then in 1919 was posted to...
who is #61 in the above photo? Bayliss, Bostrom, ???, Hodgson
Looking at the kids he is definitely the dad.
1.Cyclemotor similar to picture below bought for 10shillings from a junk shop when aged 13[IMG] My mate fell off it and bent the crank. Honda C50...
Image Works perhaps?
M900 piston circlip tool - after spending about 2 hours failing to get the circlips in I knocked this up from 20 mm aluminium bar - the circlip...
Great Sphinx of Giza Looks directly at the spring equinox sunrise it did exactly when it was built but the earth has shifted its axis a degree or...
I believe it was only the early ones that had a frame cracking problem - white frame ones and more prevalent with the 900 SS. If you find one with...
as above - the 600 is not much lighter than either the 750 or 900 but with quite a lot less power and torque, so a bit sluggish. I still have a...
You do not specify which engine, on 904 cc 2 valvers there should be one shim either side of the spring clip and I am (pretty) sure one between...
EMS has sold his business about 3 months ago
Can I ask what you used to cut the holes?
