Separate names with a comma.
It's possible a KTM dealer might stock one as they are able to supply Brembo spare parts, Ducati are not able to due to some licensing agreement...
If it is a stock 748 it should be easy enough to pick up a secondhand head. If it's the later model 748E then you may have a stepped head, which...
Ideally if you want to paint then an alloy etch primer should be used as peeling can occur. Etch primer does not however stand up to heat that...
I use 30 Thou. and I believe you can go up to about 35 thou if your ignition is capable of creating a good enough spark. The larger the gap the...
That sounds like a decent deal and will include an up to the minute alarm, worth consideration.
The Datatool system three would be a period alarm\immobiliser for your bike. I had one fitted from new when I bought my 998. The good thing...
Yes, I still have the bill of sale (£999) instruction manual, original toolkit and original pressed alloy number plate. Did everything on the...
I have a 205LC which I have had from new, my son used it for a while before passing his test several years ago. Checking it on a dyno it only put...
I have three bikes in the 748-988 range and one uses race plugs which require regular checking for trackdays etc.. So overall quite often and it...
Ducati spec. Champion plugs so the toolkit socket will\should fit those but NGK's cannot be reached by it. For me it was a quick job to turn the...
It was certainly true for my Iridium plugs on my 748 and 998. I have a lathe so machining down a standard socket wasn't too difficult. You could...
If the metal is thick enough, which it looks like it is, you could always have an insert machined up and inserted to give you a screwed and...
I'd check it starts and run it but don't ride it, get it up to temperature and check the fan is running and switching on. After that a full...
As above a decent quality weight will stick on fine but some are sub standard and I have had them fall off overnight as the glue doesn't support...
You are likely to experience quicker brake pad wear due to the petal design. My son has used a very similar set on his full race 748 with carbon...
I have used Wemoto once for an aftermarket Suzuki clutch cover gasket. It was just as good a quality as the original and considerably cheaper so...
Sigma Performance make good slipper clutches and you won't go wrong with one from them. There are other makes like STM etc. which you can use but...
Any oil that runs down the cases will tend to go to the centre of the sump, and as mentioned, the exhaust is directly under that area and when the...
Sadly this then becomes even more difficult if you are trying to follow a wiring diagram that supposedly covers your bike and then you realise it...
Not all 1999 models had 65 mm calipers I have a 1999 (V Reg.) 748 Biposto and that has 40 mm calipers although it does have three phase electrics....
