Separate names with a comma.
Cinema Paradiso - my all-time favourite film
nice https://www.ebay.co.uk/itm/Moto-Guzzi-Arone-Sport-250-circa-1950-Classic-Vintage-Motorcycle/254503594077?hash=item3b4198a85d:g:7GgAAOSww5ZeD78a
I might be wrong but I think that when the terminals corrode (through ingress of moisture) the contact surface area between the two parts of the...
I use cricket bat handle rubber - spongy and increases the diameter of the grip so your fist is less closed about £2 on ebay and it does both...
That one in that condition - walk away
^^^^ the cut end is then not plated so if it goes into the head it seizes with galvanic action which encroaches upon the whole length of the...
I would use stainless studs A4 marine grade with stainless dome nuts with a stainless spring washer, all threads in the head and inside the dome...
^^^^ sorry stupid suggestion
Bronze head
It is definitely easier to do one head/one camshaft at a time. Seating the wire clips is very important as is putting them the same way back, new...
I bought sufficient paint to paint the tank, fairing and seat, primer(2 pack), base coat and colour coat (water-based) and 2 pack lacquer and it...
Doesn't matter how fast you are so long as you look good, very Italian
At his best Jorge was fabulous to watch, relentlessly accurate and metronomic and a worthy 6 x champion. By May 2020 he will be 33 years old....
You can hurt yourself just as much when testing as when racing, you cannot race if you think the next off means you have a strong possibility of...
But when he uses the front brake it will shred the front tyre
Did you consider just spacering out the alternator case? I do not know how much you had to move it but a 6 or 8mm aluminium plate jigsawed out...
My Siemens expensive fridge/freezer had a very small label on the back saying "Made in China" and after 3 years the white enamel started dropping...
A double knocker Ducati ?
Believe it or not originally a MS [IMG]
I have never met you and probably never will, but I kind of know you from what you put up on here. I do not think you are a "moaner" just an...
