Separate names with a comma.
I am sure I am not alone Bradders, you have a potentially life threatening condition and you are treating it like a common cold, I do not agree...
A key ring might fix the zip puller
Nice, but probably not enough power to pull the skin off a rice pudding (also heavy for a 350)
If you actually mean it will not spin over when the starter engages, like the pistons are not going up and down then it could be the sprag clutch...
Good - hope it works - they are lovely when they run right. I must admit I wouldn't of thought of "reducing" the tower and gripping the jet...
Correction: the jet caps were made from 10mm hex bar the the heater blanks from 13mm hex bar
I too have suffered with the pilot screw seizing (once on a 750SS and once on a M900). I think the main problem is the rubber plugs going AWOL -...
I should work if you anneal it first, heat it up with a blow lamp and quench it in water, makes it really soft
Had the same problem with mine, I made some from 6mm aluminium plate, quite easy for the H head but the V head also requires an infill panel out...
My rather limited experience (one powder coated frame) is that whilst it is a thicker coating it does not seem to be as resilient to knocks as a...
I'd like to put that engine in a Seeley/Maxton nickel plated chrome moly frame with CF wheels and alloy tanks - c115kg and 70bhp perfect
If you want to find the mice they will be in the airbox of the 748 having eaten their way up the soya included insulation of the wiring on the way
^^^^^^^^ Typical French - a friend once had a Renault 5 - to change the starter motor the whole engine had to be removed
It's a shame the yellow ones just lack that little bit at top end
When riding and the the temperature is close to freezing, beware crossing over bridges, the air circulating underneath the road can cause the...
Nostalgia isn't what it used to be.
If you put it on too thick or too many coats before the first coat has dried it will craze and look as though someone has marked a 1000 piece...
A man was walking down the street when he was accosted by a particularly dirty and shabby-looking homeless man who asked him for a couple of quid...
I've made gaskets that way hundreds of times when I couldn't afford to buy the proper ones but never thought of doing it to masking tape - good tip
If lightness is your absolute goal then do without them, if you want to protect the fork sliders from road grit/salt then a set of machine bellows...
